BICHENGPCBBicheng Technologies Limited

TFA300 Ultra-Thin RF PCB with 10mil Core and Immersion Gold Finish

(PCBs are custom-made products, images and specifications are for reference only.)

Brief introduction

The TFA300 is an aerospace-grade PTFE ceramic composite substrate that utilizes an innovative manufacturing process without traditional fiberglass reinforcement. With a dielectric constant of 3.0±0.04, this ultra-thin 0.3mm PCB delivers exceptional frequency stability and minimal dielectric loss, making it ideal for phased array antennas, airborne radar systems, and satellite communications.

Product images

TFA300 Ultra-Thin PCB

PCB specifications

Base MaterialTFA300 PTFE-Ceramic Composite
Layer Count2-Layer Rigid Construction
Board Dimensions65mm × 51mm (±0.15mm tolerance)
Minimum Trace Width/Space5/7 mils
Minimum Drilled Hole Size0.3mm
Via Type SupportThrough-Hole Only
Overall Board Thickness0.3mm (10mil core + 35μm Cu)
Outer Layer Copper Weight1oz (35μm total)
Via Plating Thickness20μm
Surface FinishElectroless Nickel Immersion Gold (ENIG)
Silkscreen ApplicationNone (Top/Bottom)
Solder Mask ApplicationNone (Top/Bottom)
Quality Assurance100% Electrical Testing

PCB Stackup: 2-layer rigid PCB

  • Copper layer 1 - 35 μm
  • TFA300 Core - 0.254 mm (10mil)
  • Copper layer 2 - 35 μm

PCB Statistics

  • Components: 12
  • Total Pads: 43
  • Thru Hole Pads: 27
  • Top SMT Pads: 16
  • Bottom SMT Pads: 0
  • Vias: 11
  • Nets: 2

Application areas

  • Aerospace equipment, space, in-cabin equipment, aircraft;
  • Microwaves, antennas, phase-sensitive antennas;
  • Early warning radars, airborne radars, etc.;
  • Phased array antennas, beamforming networks;
  • Satellite communications, navigation;
  • Power amplifiers.

Properties

TFA300 Typical Properties

PropertyTFA300Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz3.00Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design), 10 GHz3.00Z—10 GHz50Ω microstrip line
Dk Tolerance±0.04————
Dissipation Factor, 10 GHz0.001Z—10 GHzIPC-TM-650 2.5.5.5
Dissipation Factor, 20 GHz0.001——20 GHz—
Dissipation Factor, 40 GHz0.0012——40 GHz—
Thermal Coefficient of Dk-8—ppm/°C-55 to 150°CIPC-TM-650 2.5.5.5
Copper Peel Strength (1 oz RTF)>1.6—N/mm1 oz RTF copperIPC-TM-650 2.4.8
Volume Resistivity≥5×10⁷—MΩ·cmC96/23/95IPC-TM-650 2.5.17.1
Surface Resistance≥5×10⁷—MΩC96/23/95IPC-TM-650 2.5.17.1
Electrical Strength (Z-direction)>32—KV/mm5 kW, 500 V/sIPC-TM-650 2.5.6
Breakdown Voltage (X/Y)>40—KV5 kW, 500 V/sIPC-TM-650 2.5.6
CTE (X, Y)18, 18X,Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)30Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Water Absorption0.04—%20±2°C, 24 hIPC-TM-650 2.6.2.1
Density2.15—g/cm³Room tempASTM D792
Thermal Conductivity (Z)0.60ZW/(m·K)—ASTM D5470
Td (onset)498—°CTGAIPC-TM-650 2.4.24.6
FlammabilityV-0———UL 94

Technical Advantages

  • Fiberglass-Free Construction: Eliminates fiber weave effects for consistent RF performance
  • Multi-Dk Options: Available in 2.94, 3.0, 6.15 and 10.2 variants
  • Aerospace Reliability: Stable performance from -55°C to 288°C
  • Precision Manufacturing: Special lamination process ensures uniform dielectric properties

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com