TFA300 5mil 2L Immersion Gold Glass-Free PTFE Ceramic Composite PCB for Aerospace & 77GHz Radar
(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)
Brief introduction
The dielectric layer of the Polytetrafluoroethylene ceramic composite dielectric substrate TFA series consists of PTFE resin and ceramics, and is not produced using the traditional method of impregnating glass fiber cloth with resin to make prefabricated sheets. Instead, a new process is employed to create prefabricated sheets, which are then pressed using a special lamination process. This material exhibits outstanding electrical, thermal, and mechanical properties with excellent dielectric constant at the same level, making it an aerospace-grade high-frequency and high-reliability material that can replace similar foreign products.
This series of substrates does not contain glass fiber cloth. It utilizes a large amount of uniform special nano-ceramics mixed with resin, eliminating the fiberglass effect during the propagation of electromagnetic waves. It offers excellent frequency stability, with minimal dielectric loss at the same level. The material's X/Y/Z anisotropy is minimized, and it also features a low thermal expansion coefficient equivalent to copper foil and stable dielectric temperature characteristics.
The dielectric constant of this series includes four options: 2.94, 3.0, 6.15, and 10.2 for selection. The corresponding part numbers are TFA294, TFA300, TFA615, TFA1020.
This 2-layer rigid PCB is constructed with TFA300 as the core material at 5mil (0.127mm) thickness, with immersion gold surface finish, green top solder mask, no silkscreen, and 1oz copper on both sides. Its ultra-low DK of 3.00 and lowest-in-class Df of 0.001 make it ideal for demanding aerospace, radar, and millimeter-wave applications up to 77GHz.
The dielectric constant of this series includes four options: 2.94, 3.0, 6.15, and 10.2 for selection. The corresponding part numbers are TFA294, TFA300, TFA615, TFA1020.
The TFA series comes standard with RTF low roughness copper foil, which reduces conductor loss while providing excellent peel strength. It can also be paired with rolled copper foil. The TFA series can be combined with copper or aluminum bases. TFA294 and TFA300 can be paired with embedded 50Ω resistor copper foil to form resistive film boards.
Circuit boards can be processed using standard PTFE sheet technology. The excellent mechanical and physical properties of the sheet make it suitable for multi-layer, high multi-layer, and backplane processing. At the same time, it shows excellent processability in dense hole and fine line processing.
Technical features & benefits
- Dielectric Constant (DK): 3.00 ± 0.04 at 10GHz — Tight tolerance, excellent batch-to-batch consistency
- Lowest-in-Class Dissipation Factor (Df): 0.001 at 10GHz and 20GHz — 0.0012 at 40GHz
- Ultra-Low TCDK: -8 ppm/°C (-55°C to 150°C) — Exceptional temperature stability
- CTE X-axis: 18 ppm/°C, Y-axis: 18 ppm/°C, Z-axis: 30 ppm/°C (-55°C to 288°C) — Matched to copper
- Thermal Conductivity: 0.6 W/(M·K) — Excellent heat dissipation
- Moisture Absorption: 0.04% — Extremely low
- Flammability: UL-94 V-0
- Thermal Decomposition (Td): 498°C
- Glass-Free Construction — No fiberglass effect, minimal X/Y/Z anisotropy
- Stable Performance up to 77GHz — Suitable for millimeter-wave and automotive radar applications
- Radiation Resistance & Low Outgassing — Aerospace-grade reliability
- Immersion Gold Finish — Excellent solderability, corrosion resistance, and wire bondability
- Glass-Free Design — Eliminates fiberglass effect on electromagnetic wave propagation for superior signal integrity
- Lowest-in-Class Df (0.001 @ 10GHz) — Ultra-low loss for millimeter-wave and high-frequency applications
- Tight DK Tolerance (±0.04) — Consistent impedance control with excellent batch-to-batch consistency
- Ultra-Low TCDK (-8 ppm/°C) — Exceptional temperature stability, minimal phase drift
- CTE Matched to Copper (18/18/30 ppm/K) — Reliable plated through holes and dimensional stability
- Aerospace-Grade Reliability — Radiation resistance, low outgassing, high electrical strength
- Stable up to 77GHz — Suitable for automotive radar, Ka/E/W band applications
- Low Moisture Absorption (0.04%) — Stable performance in humid environments
- DK 3.00 ± 0.04 @ 10GHz:Stable dielectric constant with excellent batch-to-batch consistency
- Df 0.001 @ 10GHz:Lowest-in-class dissipation factor for millimeter-wave applications
- Glass-Free Construction:No fiberglass effect, minimal X/Y/Z anisotropy, superior signal integrity
- TCDK: -8 ppm/°C:Ultra-low thermal coefficient, exceptional temperature stability
- CTE: 18/18/30 ppm/K:Matched to copper, reliable plated through holes
- Thermal Conductivity 0.6 W/M·K:Excellent heat dissipation for high-power applications
- Moisture Absorption 0.04%:Stable performance in humid environments
- UL 94 V-0:Flame retardant for safety compliance
- Radiation resistance & low outgassing:Aerospace-grade reliability, NASA-compliant outgassing
- Immersion Gold Finish:Excellent solderability, corrosion resistance, wire bondability
Product images
PCB specifications
| Base material | Wangling TFA300 (PTFE + Ceramic, Glass-Free) |
| Layer count | 2-layer |
| Board dimensions | 87mm x 54mm = 1 PCS, ±0.15mm |
| Minimum Trace/Space | 6/8 mils |
| Minimum Hole Size | 0.4mm |
| Blind vias | No |
| Finished board thickness | 0.2mm (including copper) |
| Finished Cu weight | 1 oz (35 μm / 1.4 mils) all layers |
| Via plating thickness | 20 μm |
| Surface finish | Immersion Gold |
| Top Silkscreen | No |
| Bottom Silkscreen | No |
| Top Solder Mask | Green |
| Bottom Solder Mask | No |
| 100% Electrical test | Used prior to shipment |
| Dielectric Thickness Range | 0.127mm(5mil), 0.254mm(10mil), 0.508mm(20mil), 0.635mm(25mil), 0.762mm(30mil), 1.016mm(40mil), 1.270mm(50mil), 1.524mm(60mil), 1.905mm(75mil), 2.03mm(80mil), 2.54mm(100mil), 3.175mm(125mil), 3.81mm(150mil), 4.06mm(160mil), 5.08mm(200mil), 6.35mm(250mil) (± tolerance per thickness) |
| Thickness Increments | Available in 0.127mm (5mil) increments; minimum 0.127mm |
| Standard Panel Sizes | 305x460mm (12x18"), 460x610mm (18x24") |
| Standard Copper Cladding | 0.5oz (18μm), 1oz (35μm) — RTF low roughness copper foil (standard) |
| DK Options | 2.94 (TFA294), 3.00 (TFA300), 6.15 (TFA615), 10.2 (TFA1020) |
| Special Options | 50Ω embedded resistor copper foil, rolled copper foil, aluminum base, copper base |
| Aluminum/Copper Base Option | TFA***-AL, TFA***-CU for shielding/heat dissipation |
| Special Sizes | Contact Wangling for non-standard thicknesses and custom sizes |
Layer stack-up
- Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)
- Layer: Dielectric, Material: TFA300 Core, Thickness: 0.127 mm (5mil)
- Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)
PCB Statistics
- Components: 18
- Total Pads: 36
- Thru Hole Pads: 19
- Top SMT Pads: 17
- Bottom SMT Pads: 0
- Vias: 6
- Nets: 2
Application areas
- Aerospace equipment, space systems, in-cabin equipment, aircraft
- Microwave, antennas, and phase-sensitive antennas
- Early warning radars, airborne radars, and various radar systems
- Phased array antennas and beamforming networks
- Satellite communications and navigation systems
- Power amplifiers and high-power RF modules
- Millimeter-wave applications up to 77GHz (automotive radar)
- Aerospace equipment, space systems, in-cabin equipment, aircraft
- Microwave, antennas, and phase-sensitive antennas
- Early warning radars, airborne radars, and various radar systems
- Phased array antennas and beamforming networks
- Satellite communications and navigation systems
- Power amplifiers and high-power RF modules
- Millimeter-wave applications up to 77GHz (automotive radar)
Properties
TFA300 Typical Properties
| Property | TFA300 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Typical), 10 GHz | 3.00 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design), 10 GHz | 3.00 | Z | — | 10 GHz | 50Ω microstrip line |
| Dk Tolerance | ±0.04 | — | — | — | — |
| Dissipation Factor, 10 GHz | 0.001 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dissipation Factor, 20 GHz | 0.001 | — | — | 20 GHz | — |
| Dissipation Factor, 40 GHz | 0.0012 | — | — | 40 GHz | — |
| Thermal Coefficient of Dk | -8 | — | ppm/°C | -55 to 150°C | IPC-TM-650 2.5.5.5 |
| Copper Peel Strength (1 oz RTF) | >1.6 | — | N/mm | 1 oz RTF copper | IPC-TM-650 2.4.8 |
| Volume Resistivity | ≥5×10⁷ | — | MΩ·cm | C96/23/95 | IPC-TM-650 2.5.17.1 |
| Surface Resistance | ≥5×10⁷ | — | MΩ | C96/23/95 | IPC-TM-650 2.5.17.1 |
| Electrical Strength (Z-direction) | >32 | — | KV/mm | 5 kW, 500 V/s | IPC-TM-650 2.5.6 |
| Breakdown Voltage (X/Y) | >40 | — | KV | 5 kW, 500 V/s | IPC-TM-650 2.5.6 |
| CTE (X, Y) | 18, 18 | X,Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 30 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Water Absorption | 0.04 | — | % | 20±2°C, 24 h | IPC-TM-650 2.6.2.1 |
| Density | 2.15 | — | g/cm³ | Room temp | ASTM D792 |
| Thermal Conductivity (Z) | 0.60 | Z | W/(m·K) | — | ASTM D5470 |
| Td (onset) | 498 | — | °C | TGA | IPC-TM-650 2.4.24.6 |
| Flammability | V-0 | — | — | — | UL 94 |
Quality Assurance
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
