TFA294 PCB 2-Layer 0.127mm Thick High-Frequency PTFE Ceramic Composites for Aerospace Applications
(PCBs are custom-made products, images and specifications are for reference only.)
Brief introduction
The TFA series features a dielectric layer made from a Polytetrafluoroethylene (PTFE) ceramic composite. Unlike traditional methods that involve impregnating glass fiber cloth with resin to create prefabricated sheets, this series employs a unique process to produce these sheets, which are then pressed using a specialized lamination technique. The resulting material showcases exceptional electrical, thermal, and mechanical properties, providing an aerospace-grade, high-frequency, and highly reliable alternative to similar foreign products.
This substrate series is free of glass fiber cloth and incorporates a significant amount of uniform special nano-ceramics blended with resin. This design removes the fiberglass effect during electromagnetic wave propagation, leading to outstanding frequency stability and minimal dielectric loss. Additionally, the material exhibits reduced X/Y/Z anisotropy and features a low thermal expansion coefficient comparable to that of copper foil, along with stable dielectric temperature characteristics.
The dielectric constant options available in this series are 2.94, 3.0, 6.15, and 10.2, corresponding to part numbers TFA294, TFA300, TFA615, and TFA1020.
Technical features & benefits
- Dielectric constant (Dk) of 2.94 at 10 GHz
- Dissipation factor of 0.0010 at 10 GHz and 20 GHz, and 0.0012 at 40 GHz
- Low temperature coefficient of dielectric constant (TCDK) of -5 ppm/°C, ranging from -55°C to 150°C
- Coefficients of thermal expansion (CTE): X-axis at 18 ppm/°C, Y-axis at 18 ppm/°C, Z-axis at 32 ppm/°C, from -55°C to 288°C
- Thermal conductivity of 0.59 W/mK
- Moisture absorption of 0.03%
- UL 94-V0 rated
Product images
PCB specifications
| Base Material | TFA294 PTFE-Ceramic Composite |
| Layer Count | 2-Layer Rigid Construction |
| Board Dimensions | 58.1mm × 66mm (±0.15mm tolerance) |
| Minimum Trace/Space | 4/5 mils |
| Minimum Hole Size | 0.2mm |
| Blind Vias | No |
| Overall Board Thickness | 0.25mm (5mil core + 35μm Cu) |
| Outer Layer Copper Weight | 1oz (35μm total) |
| Via Plating Thickness | 20μm |
| Surface Finish | ENEPIG |
| Silkscreen Application | None (Top/Bottom) |
| Solder Mask Application | None (Top/Bottom) |
| Quality Assurance | 100% Electrical Testing |
PCB Stackup: 2-layer rigid PCB
- Copper layer1: 35 µm
- TFA294 Core: 0.127mm (5 mil)
- Copper layer2: 35 µm
PCB Statistics
- Components: 10
- Total pads: 26
- Through hole pads: 15
- Top SMT pads: 11
- Bottom SMT pads: 0
- Vias: 9
- Nets: 2
6. Type of Artwork Supplied: Gerber RS-274-X
7. Quality Standard: IPC-Class-2
8. Availability: Worldwide
Application areas
- Aerospace equipment, including in-cabin systems and aircraft
- Microwave applications, antennas, and phase-sensitive antennas
- Early warning and airborne radars
- Phased array antennas and beamforming networks
- Satellite communications and navigation
- Power amplifiers
Properties
TFA294 Typical Properties
| Property | TFA294 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Typical), 10 GHz | 2.94 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design), 10 GHz | 2.94 | Z | — | 10 GHz | 50Ω microstrip line |
| Dk Tolerance | ±0.04 | — | — | — | — |
| Dissipation Factor, 10 GHz | 0.001 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dissipation Factor, 20 GHz | 0.001 | — | — | 20 GHz | — |
| Dissipation Factor, 40 GHz | 0.0012 | — | — | 40 GHz | — |
| Thermal Coefficient of Dk | -5 | — | ppm/°C | -55 to 150°C | IPC-TM-650 2.5.5.5 |
| Copper Peel Strength (1 oz RTF) | >1.6 | — | N/mm | 1 oz RTF copper | IPC-TM-650 2.4.8 |
| Volume Resistivity | ≥5×10⁷ | — | MΩ·cm | C96/23/95 | IPC-TM-650 2.5.17.1 |
| Surface Resistance | ≥5×10⁷ | — | MΩ | C96/23/95 | IPC-TM-650 2.5.17.1 |
| Electrical Strength (Z-direction) | >35 | — | KV/mm | 5 kW, 500 V/s | IPC-TM-650 2.5.6 |
| Breakdown Voltage (X/Y) | >40 | — | KV | 5 kW, 500 V/s | IPC-TM-650 2.5.6 |
| CTE (X, Y) | 18, 18 | X,Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 32 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Water Absorption | 0.03 | — | % | 20±2°C, 24 h | IPC-TM-650 2.6.2.1 |
| Density | 2.14 | — | g/cm³ | Room temp | ASTM D792 |
| Thermal Conductivity (Z) | 0.59 | Z | W/(m·K) | — | ASTM D5470 |
| Td (onset) | 498 | — | °C | TGA | IPC-TM-650 2.4.24.6 |
| Flammability | V-0 | — | — | — | UL 94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
Note: This page carried an inconsistent legacy field on the old site. It has been corrected to match the actual page content and is queued for human review.
