BICHENGPCBBicheng Technologies Limited

TFA294 High Frequency PCB - 40mil PTFE Ceramic Composite for Aerospace & Radar Applications

(PCBs are custom-made products, images and specifications are for reference only.)

Brief introduction

The dielectric layer of the Polytetrafluoroethylene ceramic composite dielectric substrate TFA series consists of PTFE resin and ceramics, and is not produced using the traditional method of impregnating glass fiber cloth with resin to make prefabricated sheets. Instead, a new process is employed to create prefabricated sheets, which are then pressed using a special lamination process. This material exhibits outstanding electrical, thermal, and mechanical properties with excellent dielectric constant at the same level, making it an aerospace-grade high-frequency and high-reliability material that can replace similar foreign products.

This series of substrates does not contain glass fiber cloth. It utilizes a large amount of uniform special nano-ceramics mixed with resin, eliminating the fiberglass effect during the propagation of electromagnetic waves. It offers excellent frequency stability, with minimal dielectric loss at the same level. The material's X/Y/Z anisotropy is minimized, and it also features a low thermal expansion coefficient equivalent to copper foil and stable dielectric temperature characteristics.

The dielectric constant of this series includes four options: 2.94, 3.0, 6.15, and 10.2 for selection. The corresponding part numbers are TFA294, TFA300, TFA615, TFA1020.

Technical features & benefits

  • Dielectric constant (Dk) of 2.94 at 10GHz
  • Dissipation factor of .0010 at 10GHz and 20 GHz, 0.0012 at 40 GHz
  • Low TCDK at -5 ppm/°C, -55°C to 150°C
  • CTE x-axis of 18 ppm/°C, CTE y-axis of 18 ppm/°C, CTE z-axis of 32 ppm/°C, -55°C to 288°C
  • Thermal conductivity of 0.59 W/mk
  • Moisture absorption of 0.03%
  • UL 94-V0
  • Small dielectric constant tolerance with excellent batch-to-batch consistency
  • Lowest dielectric loss in its class
  • Operating frequency up to 77GHz, suitable for millimeter wave and automotive radar applications
  • Excellent frequency and phase stability from -55°C to 150°C
  • Superior radiation resistance — maintains stable dielectric and physical properties after irradiation
  • Low outgassing performance, compliant with aerospace vacuum outgassing requirements
  • CTE matched to copper, ensuring PTH reliability and dimensional thermal stability
  • Low water absorption, ensuring stable performance in humid environments

Product images

TFA294 2-Layer PCB 40mil

PCB specifications

Base MaterialTFA294 PTFE-Ceramic Composite
Layer Count2 layers
Board Dimensions97.53mm × 100.28mm (±0.15mm tolerance)
Minimum Trace/Space4/6 mils
Minimum Hole Size0.35mm
Blind ViasNo
Finished Board Thickness1.1mm
Copper Weight1oz outer layers
Via Plating Thickness20μm
Surface FinishImmersion Silver
SilkscreenNone (Top & Bottom)
Solder MaskNone (Top & Bottom)
Electrical Test100% tested pre-shipment
Thickness mm (mil)Tolerance mm (mil)
0.127mm (5.0mil)±0.0127mm (0.5mil)
0.254mm (10mil)±0.02mm (1.0mil)
0.508mm (20mil)±0.03mm (1.19mil)
0.635mm (25mil)±0.03mm (1.58mil)
0.762mm (30mil)±0.04mm (1.58mil)
1.016mm (40mil)±0.05mm (2.0mil)
1.270mm (50mil)±0.05mm (2.0mil)
1.524mm (60mil)±0.07mm (2.5mil)
1.905mm (75mil)±0.09mm (3.5mil)
2.03mm (80mil)±0.09mm (3.5mil)
2.54mm (100mil)±0.13mm (5.0mil)
3.175mm (125mil)±0.20mm (8.0mil)
3.81mm (150mil)±0.25mm (10.0mil)
4.06mm (160mil)±0.25mm (10.0mil)
5.08mm (200mil)±0.25mm (10.0mil)
6.35mm (250mil)±0.32mm (12.6mil)

Layer stack-up

  • Copper Layer 1 (Top): 35 μm (1 oz)
  • TFA294 Core: 1.016 mm (40mil)
  • Copper Layer 2 (Bottom): 35 μm (1 oz)

PCB Statistics

  • Components: 21
  • Total Pads: 32
  • Thru Hole Pads: 18
  • Top SMT Pads: 14
  • Bottom SMT Pads: 0
  • Vias: 13
  • Nets: 2

Application areas

  • Aerospace equipment, space systems, in-cabin equipment, aircraft
  • Microwave, antennas, phase-sensitive antennas
  • Early warning radars, airborne radars
  • Phased array antennas, beamforming networks
  • Satellite communications, navigation systems
  • Power amplifiers and combiners

Properties

TFA294 Typical Properties

PropertyTFA294Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz2.94Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design), 10 GHz2.94Z—10 GHz50Ω microstrip line
Dk Tolerance±0.04————
Dissipation Factor, 10 GHz0.001Z—10 GHzIPC-TM-650 2.5.5.5
Dissipation Factor, 20 GHz0.001——20 GHz—
Dissipation Factor, 40 GHz0.0012——40 GHz—
Thermal Coefficient of Dk-5—ppm/°C-55 to 150°CIPC-TM-650 2.5.5.5
Copper Peel Strength (1 oz RTF)>1.6—N/mm1 oz RTF copperIPC-TM-650 2.4.8
Volume Resistivity≥5×10⁷—MΩ·cmC96/23/95IPC-TM-650 2.5.17.1
Surface Resistance≥5×10⁷—MΩC96/23/95IPC-TM-650 2.5.17.1
Electrical Strength (Z-direction)>35—KV/mm5 kW, 500 V/sIPC-TM-650 2.5.6
Breakdown Voltage (X/Y)>40—KV5 kW, 500 V/sIPC-TM-650 2.5.6
CTE (X, Y)18, 18X,Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)32Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Water Absorption0.03—%20±2°C, 24 hIPC-TM-650 2.6.2.1
Density2.14—g/cm³Room tempASTM D792
Thermal Conductivity (Z)0.59ZW/(m·K)—ASTM D5470
Td (onset)498—°CTGAIPC-TM-650 2.4.24.6
FlammabilityV-0———UL 94

Quality Assurance

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment
TFA294 material

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com