2 Layer TFA615 PCB 0.508mm (20mil) Thick with ENIG Finish for Aerospace and RF Applications
(PCBs are custom-made products, images and specifications are for reference only.)
Brief introduction
The TFA series represents an advanced PTFE-ceramic composite dielectric substrate manufactured through a proprietary process (not traditional glass fiber impregnation). This aerospace-grade material features:
Uniform nano-ceramic/resin matrix eliminating fiberglass effects
Excellent frequency stability with minimal dielectric loss
Low anisotropic expansion (X/Y/Z CTE matched to copper)
Four dielectric constant options: 2.94 (TFA294), 3.0 (TFA300), 6.15 (TFA615), 10.2 (TFA1020)
Superior thermal/mechanical properties for high-reliability applications
Technical features & benefits
- Dielectric Constant (Dk): 6.15±0.12 @10GHz
- Dissipation Factor: 0.0015 @10GHz, 0.0017 @20GHz
- CTE: X/Y-16 ppm/°C, Z-29 ppm/°C (-55°C to 288°C)
- Thermal Conductivity: 0.8 W/mK
- Moisture Absorption: 0.06%
- UL 94-V0 Flame Rated
- Decomposition Temp (Td): 503°C
- Eliminates fiberglass wave propagation issues
- Stable dielectric properties across temperatures
- Aerospace-grade reliability
- Excellent high-frequency performance
- Compatible with standard PCB processing
Product images
PCB specifications
| Base Material | TFA615 PTFE-Ceramic Composite |
| Layer Count | 2 layers |
| Board Dimensions | 206mm × 54mm (±0.15mm tolerance) |
| Minimum Trace/Space | 4/6 mils |
| Minimum Hole Size | 0.3mm |
| Blind Vias | No |
| Finished Board Thickness | 0.6mm |
| Copper Weight | 1oz outer layers |
| Via Plating Thickness | 20μm |
| Surface Finish | Immersion Gold (ENIG) |
| Silkscreen | None (Top & Bottom) |
| Solder Mask | None (Top & Bottom) |
| Electrical Test | 100% tested pre-shipment |
Layer stack-up
- Copper Layer 1: 35μm
- TFA615 Core: 0.508mm (20mil)
- Copper Layer 2: 35μm
PCB Statistics
- Components: 35
- Pads: 153 (121 thru-hole, 32 SMT)
- Vias: 77
- Nets: 2
Application areas
- Aerospace/avionics systems
- Microwave antennas & radar systems
- Satellite communication equipment
- Phased array antennas
- RF power amplifiers
Properties
TFA615 Typical Properties
| Property | TFA615 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Typical), 10 GHz | 6.15 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design), 10 GHz | 6.4 | Z | — | 10 GHz | 50Ω microstrip line |
| Dk Tolerance | ±0.12 | — | — | — | — |
| Dissipation Factor, 10 GHz | 0.0015 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dissipation Factor, 20 GHz | 0.0017 | — | — | 20 GHz | — |
| Dissipation Factor, 40 GHz | — | — | — | 40 GHz | — |
| Thermal Coefficient of Dk | -215 | — | ppm/°C | -55 to 150°C | IPC-TM-650 2.5.5.5 |
| Copper Peel Strength (1 oz RTF) | >1.6 | — | N/mm | 1 oz RTF copper | IPC-TM-650 2.4.8 |
| Volume Resistivity | ≥5×10⁷ | — | MΩ·cm | C96/23/95 | IPC-TM-650 2.5.17.1 |
| Surface Resistance | ≥5×10⁷ | — | MΩ | C96/23/95 | IPC-TM-650 2.5.17.1 |
| Electrical Strength (Z-direction) | >30 | — | KV/mm | 5 kW, 500 V/s | IPC-TM-650 2.5.6 |
| Breakdown Voltage (X/Y) | >30 | — | KV | 5 kW, 500 V/s | IPC-TM-650 2.5.6 |
| CTE (X, Y) | 16, 16 | X,Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 29 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Water Absorption | 0.06 | — | % | 20±2°C, 24 h | IPC-TM-650 2.6.2.1 |
| Density | 2.5 | — | g/cm³ | Room temp | ASTM D792 |
| Thermal Conductivity (Z) | 0.80 | Z | W/(m·K) | — | ASTM D5470 |
| Td (onset) | 503 | — | °C | TGA | IPC-TM-650 2.4.24.6 |
| Flammability | V-0 | — | — | — | UL 94 |
Quality Assurance
- IPC-Class 2 compliant
- 100% electrical tested
- Global availability
- Gerber RS-274X support
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
Note: This page carried an inconsistent legacy field on the old site. It has been corrected to match the actual page content and is queued for human review.
