BICHENGPCBBicheng Technologies Limited

RT/duroid 6202 20mil ENIG High Frequency PCB - Low Loss PTFE Laminate

(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)

Brief introduction

Rogers RT/duroid 6202 high frequency circuit materials are low loss and low dielectric constant laminates with limited woven glass reinforcement. It offers electrical and mechanical properties essential in designing complex microwave structures that are mechanically reliable and electrically stable. Excellent dimensional stability (0.05 to 0.07 mils/inch) is achieved by the addition of limited woven glass reinforcement. This often eliminates double etching to achieve tight positional tolerances.

Applications particularly suited to the unique properties of RT/duroid 6202 material include flat and non-planar structures such as antennas and complex multilayer circuits with interlayer components.

This 2-layer rigid PCB is constructed with RT/duroid 6202 as the core material at 20mil (0.508mm) thickness, with ENIG surface finish, green top solder mask, white top silkscreen, and 1oz copper on both sides. Its DK of 2.94 offers excellent high-frequency performance with low loss, making it ideal for demanding applications such as phased array antennas, ground based and airborne radar systems, GPS antennas, power backplanes, and beam forming networks.

Rogers RT/duroid 6202 Material – Product Introduction

RT/duroid 6202 high frequency circuit material is a low loss and low dielectric constant laminate offering superior electrical and mechanical properties essential in designing complex microwave structures which are mechanically reliable and electrically stable.

Excellent dimensional stability (0.05 to 0.07 mils/inch) is achieved by the addition of limited woven glass reinforcement. This often eliminates double etching to achieve tight positional tolerances.

½ oz. to 2 oz./ft.² electrodeposited and rolled copper foil may be specified as cladding on dielectric thicknesses from 0.005" to 0.060" (0.127 to 1.524 mm).

Applications particularly suited to the unique properties of RT/duroid 6202 material include flat and non-planar structures such as antennas and complex multilayer circuits with interlayer components.

Technical features & benefits

  • Dielectric Constant (Dk): 2.94 ± 0.04 (≥0.020" laminates) at 10GHz/23°C
  • DK of 0.005" laminates: 3.06 ± 0.04
  • DK of 0.010" and 0.015" laminates: 3.02 ± 0.04
  • Dissipation Factor (Df): 0.0015 at 10GHz/23°C
  • Low Thermal Coefficient of Dk: 5 ppm/°C at 10GHz (-50°C to +150°C)
  • CTE (-55 to 288°C): X-axis 15 ppm/°C, Y-axis 15 ppm/°C, Z-axis 30 ppm/°C
  • Td: 500°C TGA
  • Thermal Conductivity: 0.68 W/(M·K)
  • Moisture Absorption: 0.04%
  • UL 94-V0 Flammability Rating
  • Excellent dimensional stability (0.05 to 0.07 mils/inch)
  • Limited woven glass reinforcement
  • Low Loss — Excellent high frequency performance with minimal signal loss
  • In-plane Expansion Coefficient Matched to Copper — Reliable plated through holes
  • Excellent Electrical and Mechanical Properties — Mechanically reliable and electrically stable
  • Very Low Etch Shrinkage — Tight positional tolerances, often eliminating double etching
  • Excellent Dimensional Stability (0.05 to 0.07 mils/inch) — Consistent performance
  • Low Thermal Coefficient of Dk (5 ppm/°C) — Stable electrical performance over temperature
  • Low Moisture Absorption (0.04%) — Stable performance in humid environments
  • ENIG Finish — Excellent solderability, corrosion resistance, and wire bondability
  • DK 2.94 ± 0.04 @ 10GHz (≥0.020"):Stable dielectric constant for consistent impedance control
  • Df 0.0015 @ 10GHz:Low loss for high-frequency RF and microwave designs
  • TCDK: 5 ppm/°C:Extremely low thermal coefficient of dielectric constant
  • CTE: 15/15/30 ppm/°C:In-plane expansion coefficient matched to copper
  • Td: 500°C TGA:High thermal stability for demanding environments
  • Thermal Conductivity 0.68 W/m/K:Efficient heat removal
  • Moisture Absorption 0.04%:Excellent stability in humid conditions
  • UL 94 V-0:Flame retardant for safety compliance
  • Excellent dimensional stability:Very low etch shrinkage, tight positional tolerances
  • ENIG finish:Excellent solderability, corrosion resistance, wire bondability

Product images

RT/duroid 6202 PCB
RT/duroid 6202 Material

PCB specifications

Base materialRogers RT/duroid 6202 (PTFE + Limited Woven Glass Reinforcement)
Layer count2-layer rigid PCB
Board dimensions42.36mm x 21.9mm = 1 PCS
Minimum Trace/Space4/7 mils
Minimum Hole Size0.4mm
Blind viasNo
Finished board thickness0.6mm
Finished Cu weight1 oz (35 μm / 1.4 mils) outer layers
Via plating thickness20 μm
Surface finishENIG
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment
ParameterOptions
Dielectric Thickness Range0.005" to 0.060" (0.127mm to 1.524mm)
Standard Copper Cladding½ oz. to 2 oz./ft.² electrodeposited and rolled copper foil
Special OptionsContact Rogers Corporation for additional thicknesses, other sizes & any other type of cladding

Layer stack-up

Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)

Layer: Dielectric, Material: Rogers RT/duroid 6202 Substrate, Thickness: 0.508 mm (20mil)

Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)

PCB Statistics

  • Components: 13
  • Total Pads: 20
  • Thru Hole Pads: 11
  • Top SMT Pads: 9
  • Bottom SMT Pads: 0
  • Vias: 6
  • Nets: 2

Application areas

  • Phased Array Antennas
  • Ground Based and Airborne Radar Systems
  • Global Positioning System Antennas
  • Power Backplanes
  • Commercial Airline Collision Avoidance
  • Beam Forming Networks
  • High Reliability Complex Multilayer Circuits
  • Phased Array Antennas
  • Ground Based and Airborne Radar Systems
  • Global Positioning System Antennas
  • Power Backplanes
  • Commercial Airline Collision Avoidance
  • Beam Forming Networks
  • High Reliability Complex Multilayer Circuits

Properties

RT/duroid 6202 Typical Properties

PropertyRT/duroid 6202Dir.UnitsConditionTest Method
Dielectric Constant εr2.94 ± 0.04Z—10 GHz / 23°CIPC-TM-650 2.5.5.5
Dissipation Factor, tan δ0.0015Z—10 GHz / 23°CIPC-TM-650 2.5.5.5
Thermal Coefficient of εr+5Zppm/°C10 GHz, -50 to +150°CIPC-TM-650 2.5.5.5
Volume Resistivity10⁶ZMΩ·cmCondition AASTM D257
Surface Resistivity10⁹ZMΩCondition AASTM D257
Moisture Absorption0.04—%D23/24, D48/50IPC-TM-650 2.6.2.1
Thermal Conductivity0.68—W/(m·K)80°CASTM C518
CTE (X / Y)15 / 15X/Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)30Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Td500—°C (TGA)—ASTM D3850
Density2.1—g/cm³—ASTM D792
Specific Heat0.93 (0.22)—J/g·K—Calculated
Copper Peel Strength9.1 (1.6)—lbs/in (N/mm)—IPC-TM-650 2.4.8
FlammabilityV-0———UL94
Lead-Free Process CompatibleYes————

Quality Assurance

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment
  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com