Rogers High Frequency PCB Built on RT/Duroid 6010 DK10.2 50mil With Immersion Gold for Satellite Communications Systems
(Note: Printed Circuit Boards are custom-made products; the images and specifications shown are for reference only.)
Brief introduction
Hello Everyone,
Today, we will explore the features of the Rogers 6010 PCB.
Rogers RT/Duroid 6010LM microwave laminates are ceramic-PTFE composites specifically designed for high-performance electronic and microwave circuit applications requiring a high dielectric constant. This material is available with a dielectric constant value of 10.2, making it ideal for various applications.
Technical features & benefits
- High Dielectric Constant: Enables circuit size reduction.
- Low Loss: Ideal for operation at X-band frequencies and below.
- Moisture Resistance: Low moisture absorption minimizes electrical loss.
- Z-Axis Stability: Provides reliable plated through-holes (PTH) in multilayer boards.
- Tight DK and Thickness Control: Ensures repeatable circuit performance.
Product images
Application areas
- Aircraft collision avoidance systems
- Ground radar warning systems
- Patch antennas
- Satellite communications systems
- Thank you for reading!
Our PCB Capability
| PCB Material | Ceramic-PTFE composite |
| Designator | RT/Duroid 6010LM |
| Dielectric Constant | 10.2 ±0.25 (process), 10.7 (design) |
| Layer Count | 1 Layer, 2 Layer |
| Copper Weight | 0.5oz (17µm), 1oz (35µm), 2oz (70µm) |
| PCB Thickness | 10mil (0.254mm), 25mil (0.635mm), 50mil (1.27mm), 75mil (1.90mm) |
| PCB Size | ≤400mm x 500mm |
| Solder Mask | Green, Black, Blue, Yellow, Red, etc. |
| Surface Finish | Bare Copper, HASL, ENIG, Immersion Tin, Immersion Silver, OSP |
RT/Duroid 6010LM microwave laminates offer ease of fabrication and stability during use. These properties facilitate mass production and reduce overall costs. The material features tight dielectric constant and thickness control, low moisture absorption, and excellent thermal-mechanical stability.
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
