Rogers PCB Built on RT/Duroid 6002 10mil (0.254mm) DK2.94 with Immersion Gold for Phased Array Antennas
(Note: Printed Circuit Boards are custom-made products; the images and specifications shown are for reference only.)
Brief introduction
Rogers RT/Duroid 6002 is a pioneering microwave material, recognized for its low loss and low dielectric constant. This laminate offers exceptional electrical and mechanical properties, making it ideal for designing complex microwave structures that require both mechanical reliability and electrical stability.
Technical features & benefits
- Thermal Stability and Performance: The thermal coefficient of dielectric constant for RT/Duroid 6002 remains impressively low across a temperature range of -55℃ to +150℃. This stability is crucial for designers of filters, oscillators, and delay lines, ensuring optimal performance in today's demanding applications.
- Low Z-axis Coefficient of Thermal Expansion (CTE): This characteristic guarantees excellent reliability for plated through holes. RT/Duroid 6002 materials have successfully undergone temperature cycling (-55℃ to 125℃) for over 5000 cycles without a single via failure.
- Dimensional Stability: Achieving excellent dimensional stability (0.2 to 0.5 mils/inch) is possible by aligning the X and Y coefficients of expansion with copper. This alignment often eliminates the need for double etching, ensuring tight positional tolerances.
- Low Tensile Modulus: The low tensile modulus significantly minimizes stress on solder joints, allowing for constrained expansion of the laminate by a minimal amount of low CTE metal (6 ppm/℃), which enhances surface mount reliability.
Product images
PCB specifications
Rogers RT/Duroid 6002 10mil 0.254mm High Frequency PCB for Phased Array Antennas
| PCB SIZE | 78 x 77 mm = 1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | NO |
| Minimum Trace and Space: | 10 mil / 10 mil |
| Minimum / Maximum Holes: | 0.3 mm / 0.6 mm |
| Number of Different Holes: | 1 |
| Number of Drill Holes: | 2 |
| BOARD MATERIAL | — |
| Glass Epoxy: | RT/duroid 6002 0.254mm |
| Final foil external: | 1 oz |
| Final foil internal: | 1 oz |
| Final height of PCB: | 0.3 mm ±0.1 |
| PLATING AND COATING | — |
| Surface Finish | Immersion gold (51.3%) 0.05µm over 3µm nickel |
| VIA | Plated through hole(PTH), minimum size 0.3mm. |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 35um(1 oz)+plate TOP layer
- RT/duroid 6002 0.254mm
- copper ------- 35um(1 oz)+plate BOT layer
Application areas
The unique properties of RT/Duroid 6002 make it particularly suitable for various applications, including:
- Airborne radar systems
- Beam forming networks
- Commercial airline collision avoidance
- Global positioning system antennas
- Ground-based systems
- High-reliability complex multi-layer circuits
- Phased array antennas
- Power backplanes
Properties
RT/duroid 6002 Typical Properties
| Property | RT/duroid 6002 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 2.94 ± 0.04 | Z | — | 10 GHz / 23°C | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 2.94 | — | — | 8–40 GHz | Differential Phase Length Method |
| Dissipation Factor | 0.0012 | Z | — | 10 GHz / 23°C | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of εr | +12 | Z | ppm/°C | 10 GHz, 0–100°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 10⁶ | Z | MΩ·cm | Condition A | ASTM D257 |
| Surface Resistivity | 10⁷ | Z | MΩ | Condition A | ASTM D257 |
| Moisture Absorption | 0.02 | — | % | D48/50 | — |
| Thermal Conductivity | 0.60 | — | W/(m·K) | 80°C | ASTM C518 |
| CTE (X / Y / Z) | 16 / 16 / 24 | X/Y/Z | ppm/°C | 23°C / 50% RH | IPC-TM-650 2.4.41 |
| Td | 500 | — | °C (TGA) | — | ASTM D3850 |
| Density | 2.1 | — | g/cm³ | — | ASTM D792 |
| Specific Heat | 0.93 (0.22) | — | J/g·K | — | Calculated |
| Copper Peel Strength | 8.9 (1.6) | — | lbs/in (N/mm) | — | IPC-TM-650 2.4.8 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Conclusion
RT/Duroid 6002 PCBs are designed for a wide range of applications, particularly in environments requiring high performance and reliability. For inquiries or further information, please feel free to contact us.
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
