Rogers RT/Duroid 6002 High Frequency PCB with 10mil, 20mil, 30mil and 60mil Coating Immersion Gold and Immersion Silver
(Note: PCBs are custom-made products; the images and specifications shown are for reference only.)
Brief introduction
Hello everyone,
Today, we talk about the high frequency PCB made on RT/duroid 6002 material.
RT/Duroid 6002 is a premier low-loss, low-dielectric-constant laminate designed to meet stringent requirements for mechanical reliability and electrical stability in complex microwave structural designs. This material primarily consists of PTFE ceramic composites.
The dielectric constant of RT/Duroid 6002 exhibits exceptional resistance to temperature fluctuations between -55°C and +150°C, making it suitable for applications involving filters, oscillators, and delay lines that demand electrical stability.
Technical features & benefits
- Low Loss: Ensures outstanding high-frequency performance.
- Mechanical and Electrical Reliability: Robust multi-layer board construction.
- Dimensional Stability: Extremely low thermal coefficient of dielectric constant.
- In-Plane Expansion Compatibility: Matched to copper, enhancing surface-mounted assembly reliability.
- Low Outgassing: Ideal for space applications.
Product images
Application areas
- Phased Array Antennas
- Ground-Based and Airborne Radar Systems
- GPS Antennas
- Power Backplanes
- Commercial Airline Collision Avoidance Systems
Our PCB Capability
| PCB Material: | Ceramic-filled PTFE composite |
| Designation: | RT/duroid 6002 |
| Dielectric constant: | 2.94 ±0.04 (process) |
| 2.94 (design) | |
| Layer count: | 2 Layer, Multilayer |
| Copper weight: | 0.5oz (17µm), 1oz (35µm), 2oz (70µm) |
| PCB thickness: | 10mil (0.254mm), 20mil (0.508mm) |
| 30mil (0.762mm), 60mil (1.524mm), 120mil (3.048mm) | |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface finish: | Bare copper, HASL, ENIG, Immersion Silver, OSP etc. |
The base copper options for RT/Duroid PCBs include 0.5oz, 1oz, and 2oz, with a wide range of PCB thicknesses from 5mil to 120mil available for our designers' consideration.
The standard color for RT/Duroid 6002 PCBs is white. This material is highly suited for both flat and non-planar structures, including antennas, complex multi-layer circuits with inner-layer connections, and microwave circuits designed for aerospace applications in challenging environments.
If you have any questions or require further information, please feel free to contact us. Thank you for reading!
Properties
RT/duroid 6002 Typical Properties
| Property | RT/duroid 6002 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 2.94 ± 0.04 | Z | — | 10 GHz / 23°C | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 2.94 | — | — | 8–40 GHz | Differential Phase Length Method |
| Dissipation Factor | 0.0012 | Z | — | 10 GHz / 23°C | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of εr | +12 | Z | ppm/°C | 10 GHz, 0–100°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 10⁶ | Z | MΩ·cm | Condition A | ASTM D257 |
| Surface Resistivity | 10⁷ | Z | MΩ | Condition A | ASTM D257 |
| Moisture Absorption | 0.02 | — | % | D48/50 | — |
| Thermal Conductivity | 0.60 | — | W/(m·K) | 80°C | ASTM C518 |
| CTE (X / Y / Z) | 16 / 16 / 24 | X/Y/Z | ppm/°C | 23°C / 50% RH | IPC-TM-650 2.4.41 |
| Td | 500 | — | °C (TGA) | — | ASTM D3850 |
| Density | 2.1 | — | g/cm³ | — | ASTM D792 |
| Specific Heat | 0.93 (0.22) | — | J/g·K | — | Calculated |
| Copper Peel Strength | 8.9 (1.6) | — | lbs/in (N/mm) | — | IPC-TM-650 2.4.8 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
