Rogers RT/duroid 6006 High Frequency PCB on 25mil, 50mil, and 75mil Coating with Immersion Gold and Green Mask for Ground Radar Warning
(Note: Printed Circuit Boards are custom-made products; the images and specifications shown are for reference only.)
Brief introduction
Hello Everyone,
Today, we will discuss the Rogers 6006 PCB.
Rogers RT/duroid 6006 microwave laminates are ceramic-PTFE composites designed for electronic and microwave circuit applications that require a high dielectric constant. The RT/duroid 6006 laminate offers a dielectric constant of 6.15.
Technical features & benefits
- High Dielectric Constant: Enables circuit size reduction.
- Low Loss: Ideal for applications operating at X-band or below.
- Tight DK and Thickness Control: Ensures repeatable circuit performance.
Product images
Application areas
- Aircraft collision avoidance systems
- Ground radar warning systems
- Patch antennas
- Satellite communication systems
- Thank you for reading!
Our PCB Capability
| PCB Material | Ceramic-PTFE composite |
| Designator | RT/duroid 6006 |
| Dielectric Constant | 6.15 ±0.15 (process), 6.45 (design) |
| Layer Count | 1 Layer, 2 Layer |
| Copper Weight | 0.5oz (17µm), 1oz (35µm), 2oz (70µm) |
| PCB Thickness | 10mil (0.254mm), 25mil (0.635mm), 50mil (1.27mm), 75mil (1.90mm) |
| PCB Size | ≤400mm x 500mm |
| Solder Mask | Green, Black, Blue, Yellow, Red, etc. |
| Surface Finish | Bare Copper, HASL, ENIG, Immersion Tin, Immersion Silver, OSP |
RT/duroid 6006 microwave laminates are known for their ease of fabrication and stability in use. These properties facilitate mass production and reduce costs. The laminates feature tight control over dielectric constant and thickness, low moisture absorption, and excellent thermal-mechanical stability.
Properties
RT/duroid 6006 Typical Properties
| Property | RT/duroid 6006 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 6.15 ± 0.15 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 6.45 | Z | — | — | Microstrip |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -410 | — | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 2 × 10⁷ | — | MΩ·cm | Condition A | ASTM D257 |
| Surface Resistivity | 7 × 10⁷ | — | MΩ | Condition A | ASTM D257 |
| Moisture Absorption | 0.05 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.49 | Z | W/(m·K) | 50°C | ASTM C518 |
| CTE (X) | 47 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 34 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 117 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 14.3 (2.5) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 2.7 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
