BICHENGPCBBicheng Technologies Limited

Innovative PCB Solutions: RO4003C and Tg170 FR-4 for High-Frequency Applications

(Custom PCBs are custom-made products, images and specifications are for reference only.)

Brief introduction

(Custom PCBs are tailored products; the images and specifications provided are for reference only.)

Rogers RO4003C materials are proprietary woven glass reinforced hydrocarbon/ceramics known for their exceptional electrical performance, comparable to PTFE/woven glass, while maintaining the manufacturability of epoxy/glass. This design offers superior high-frequency performance and cost-effective circuit fabrication. RO4003C is a low-loss material that can be produced using standard epoxy/glass (FR-4) processes, making it competitively priced.

These materials possess essential properties required by designers of RF microwave circuits, matching networks, and controlled impedance transmission lines. Their low dielectric loss allows RO4003C to be utilized in applications where higher operating frequencies restrict the use of traditional circuit board laminates. Available in various configurations, RO4003C laminates utilize both 1080 and 1674 glass fabric styles, all meeting the same laminate electrical performance specifications. Importantly, RO4003C materials are non-brominated and do not meet the UL 94 V-0 rating.

Technical features & benefits

  • Dielectric Constant: 3.38 ± 0.05 at 10 GHz
  • Dissipation Factor: 0.0027 at 10 GHz
  • Thermal Conductivity: 0.71 W/m/°K
  • Thermal Coefficient of Dielectric Constant: +40 ppm/°C, ranging from -50°C to 150°C
  • CTE Matched to Copper: X-axis: 11 ppm/°C, Y-axis: 14 ppm/°C
  • Low Z-axis Coefficient of Thermal Expansion: 46 ppm/°C
  • Glass Transition Temperature (Tg): >280 °C
  • Low Moisture Absorption: 0.06%
  • Lower Z-axis CTE for improved through-hole reliability
  • Excellent Mechanical Processability and thermal resistance
  • Lead-Free Compatible
  • Tg: 180°C (DSC), UV Blocking/AOI compatible
  • High Heat Resistance
  • Excellent Anti-CAF Performance
  • Low Water Absorption

Product images

6-Layer Hybrid PCB RO4003C and FR-4

PCB specifications

Base MaterialRO4003C and Tg170 FR-4 mixed
Layer Count6 layers
Board Dimensions62.5mm x 57.8mm (± 0.15mm)
Minimum Trace/Space4/7 mils
Minimum Hole Size0.3mm
Blind Vias & Buried ViasTop layer to inner layer 2, inner layer 2 to inner layer 3
Finished Board Thickness1.1mm
Finished Copper Weight1 oz (1.4 mils) for inner/outer layers
Via Plating Thickness20 μm
Surface FinishImmersion Silver
Top SilkscreenWhite
Bottom SilkscreenNone
Top Solder MaskMatt Blue
Bottom Solder MaskMatt Blue
Impedance Control90 ohm on 4 mil / 7 mil traces/gaps top layer
Print Series NumberIncluded
Via Filling0.3mm via filled and capped
Electrical Testing100% electrical test prior to shipment

Layer stack-up

  • Copper Layer 1: 35 μm
  • RO4003C: 0.305 mm (12 mil)
  • Copper Layer 2: 35 μm
  • Prepreg 1080 RC63%: 0.0644 mm (2.5 mil)
  • Copper Layer 3: 35 μm
  • S1000-2M: 0.203 mm (3 mil)
  • Copper Layer 4: 35 μm
  • Prepreg 1080 RC63%: 0.0644 mm (2.5 mil)
  • Copper Layer 5: 35 μm
  • RO4003C: 0.305 mm (12 mil)
  • Copper Layer 6: 35 μm

PCB Statistics

  • Components: 22
  • Total Pads: 39
  • Through Hole Pads: 21
  • Top SMT Pads: 18
  • Bottom SMT Pads: 0
  • Vias: 21
  • Nets: 5

Application areas

  • Commercial airline broadband antennas
  • Microstrip and stripline circuits
  • Millimeter-wave applications
  • Radar systems
  • Guidance systems
  • Point-to-point digital radio antennas
  • In summary, RO4003C and Tg170 FR-4 are high-performance materials ideal for a range of applications in the PCB industry, providing excellent reliability and efficiency for high-frequency designs.

Properties

RO4003C Typical Properties

PropertyRO4003CDir.UnitsConditionTest Method
Dielectric Constant (Process)3.38 ± 0.05Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)3.55Z——Microstrip / Differential Phase Length
Dissipation Factor0.0027Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk+40—ppm/°C-50 to 150°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity1.7 × 10¹⁰—MΩ·cmCondition AIPC-TM-650 2.5.17.1
Surface Resistivity4.2 × 10⁹—MΩCondition AIPC-TM-650 2.5.17.1
Moisture Absorption0.04—%D48/50ASTM D570
Thermal Conductivity0.71ZW/(m·K)50°CASTM D5470
CTE (X)11Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)14Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)46Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Copper Peel Strength6.0 (1.05)—lbs/in (N/mm)1 oz ED foilIPC-TM-650 2.4.8
Density1.8—g/cm³—ASTM D792
FlammabilityNon-FR———UL94
Lead-Free Process CompatibleYes————

Standards and Availability

  • Artwork Type: Gerber RS-274-X
  • Accepted Standard: IPC-Class-2
  • Availability: Worldwide

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com