Advanced PCB Materials for High-Frequency Applications: RT/Duroid 5880 and RO4003C
(Custom PCBs are custom-made products, images and specifications are for reference only.)
Brief introduction
(Custom PCBs are tailored products; the images and specifications provided are for reference only.)
Product images
PCB specifications
| Base Material | RT/Duroid 5880 and RO4003C mixed |
| Layer Count | 4 layers |
| Board Dimensions | 110mm x 51mm (± 0.15mm) |
| Minimum Trace/Space | 4/6 mils |
| Minimum Hole Size | 0.3mm |
| Blind Vias | Top side to Inner layer 1, Inner layer 2 to bottom side |
| Finished Board Thickness | 1.3mm |
| Finished Copper Weight | 1 oz (1.4 mils) for inner/outer layers |
| Via Plating Thickness | 20 μm |
| Surface Finish | Immersion Gold |
| Top Silkscreen | White |
| Bottom Silkscreen | None |
| Top Solder Mask | Green |
| Bottom Solder Mask | None |
| Electrical Testing | 100% electrical test before shipment |
Layer stack-up
- Copper Layer 1: 35 μm
- RT/Duroid 5880: 0.787 mm (31 mil)
- Copper Layer 2: 35 μm
- RO4450F Prepreg Bondply: 0.101 mm (4 mil)
- Copper Layer 3: 35 μm
- RO4003C: 0.203 mm (8 mil)
- Copper Layer 4: 35 μm
PCB Statistics
- Components: 41
- Total Pads: 85
- Through Hole Pads: 54
- Top SMT Pads: 31
- Bottom SMT Pads: 0
- Vias: 52
- Nets: 5
Application areas
- Commercial airline broadband antennas
- Microstrip and stripline circuits
- Millimeter-wave applications
- Radar systems
- Guidance systems
- Point-to-point digital radio antennas
- In conclusion, RT/Duroid 5880 and RO4003C are top-tier materials in the PCB industry, delivering high performance for demanding high-frequency applications. Their unique properties ensure reliability and efficiency in advanced electronic designs.
Properties
RO4003C Typical Properties
| Property | RO4003C | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.38 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.55 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +40 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 4.2 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.04 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.71 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 11 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 46 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 6.0 (1.05) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Rogers RT/Duroid 5880
Rogers RT/Duroid 5880 high-frequency laminates are PTFE composites reinforced with glass microfibers. This material exhibits a low dielectric constant (Dk) and low dielectric loss, making it highly suitable for high-frequency and broadband applications. The randomly oriented microfibers that reinforce the PTFE composites help maintain uniformity in the Dk, ensuring reliable performance in demanding environments.
Rogers RO4003C
Rogers RO4003C materials, on the other hand, are proprietary woven glass reinforced hydrocarbon/ceramics. They combine the electrical performance characteristics of PTFE with woven glass and the manufacturability of epoxy/glass. RO4003C laminates offer precise control over dielectric constant (Dk) and low loss while utilizing the same processing techniques as standard epoxy/glass. This results in a significantly lower cost compared to conventional microwave laminates. Unlike PTFE-based microwave materials, RO4003C does not require special through-hole treatments or handling procedures. Notably, these materials are non-brominated and do not meet the UL 94 V-0 rating.
RT/Duroid 5880
- Rogers RT/Duroid 5880 is characterized by:
- Dielectric Constant: 2.2 with a tolerance of 0.02 at 10 GHz and 23°C
- Dissipation Factor: 0.0009 at 10 GHz
- Temperature Coefficient of Dielectric Constant (TCDk): -125 ppm/°C
- Low Moisture Absorption: 0.02%
- Coefficient of Thermal Expansion (CTE): X-axis: 31 ppm/°C, Y-axis: 48 ppm/°C, Z-axis: 237 ppm/°C
- Isotropic Properties
RO4003C
- Rogers RO4003C features include:
- Dielectric Constant: 3.38 ± 0.05 at 10 GHz
- Dissipation Factor: 0.0027 at 10 GHz
- Thermal Conductivity: 0.71 W/m/°K
- Thermal Coefficient of Dielectric Constant: +40 ppm/°C, ranging from -50°C to 150°C
- Matched CTE to Copper: X-axis: 11 ppm/°C, Y-axis: 14 ppm/°C
- Low Z-axis CTE: 46 ppm/°C
- Glass Transition Temperature (Tg): >280 °C
- Low Moisture Absorption: 0.06%
Standards and Availability
- Artwork Type: Gerber RS-274-X
- Accepted Standard: IPC-Class-2
- Availability: Worldwide
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
