Advanced 8-Layer HDI Hybrid PCBs Utilizing RO4003C and S1000-2M for High-Frequency Applications
(Custom PCBs are custom-made products, images and specifications are for reference only.)
Brief introduction
(Custom PCBs are tailored products; the images and specifications provided are for reference only.)
Rogers RO4003C materials are woven glass reinforced hydrocarbon/ceramics that provide the high-frequency performance of PTFE with the manufacturability of epoxy/glass. This low-loss material is suitable for RF microwave circuits and matching networks, allowing for competitive circuit fabrication.
RO4003C laminates are available in various configurations, using both 1080 and 1674 glass fabric styles, all meeting strict electrical performance specifications. The material is non-brominated and not UL 94 V-0 rated.
Technical features & benefits
- Dielectric Constant: 3.38 ± 0.05 at 10 GHz
- Dissipation Factor: 0.0027 at 10 GHz
- Thermal Conductivity: 0.71 W/m/K
- Thermal Coefficient of Dielectric Constant: +40 ppm/°C (range -50°C to 150°C)
- CTE Matched to Copper: X-axis: 11 ppm/°C, Y-axis: 14 ppm/°C
- Low Z-axis CTE: 46 ppm/°C
- Glass Transition Temperature (Tg): > 280°C
- Low Moisture Absorption: 0.06%
- Low Z-axis CTE of 2.4 ppm/°C, excellent through-hole reliability
- High Tg of 185°C, suitable for lead-free applications
- Low moisture absorption of 0.08%, humidity resistance
- T260: 60 minutes, T288: 30 minutes
- UL 94-V0 flammability rating
Product images
PCB specifications
| Board Type | 8 layers |
| Material Type | RO4003C + FR-4 Tg 170°C |
| Solder Mask | Both sides, Green |
| Silkscreen Print | Top side, White |
| Surface Finish | ENIG (Electroless Nickel Immersion Gold) |
| Total Board Thickness | 1.5mm ± 10% |
| Board Size | 87.5mm x 40.6mm (1 PCS) |
| Minimum Hole Size | 0.2mm |
| Solder Mask Thickness | 10µm |
| Minimum Dielectric Thickness | 100µm |
| Minimum Trace Line Width | 115µm |
| Minimum Spacing | 135µm |
| Blind Vias | Yes, between L1-L2 and L7-L8 |
| Buried Vias | Yes, between L2-L7 |
| Back Drilled Vias | Yes, between L1-L6 |
| Impedance Controlled | 50 ohm, differential pairs, Top layer, 4mil/4mil trace/gap, reference layer 2 |
| — | 100 ohm, differential pairs, Top layer, 5mil/6mil trace/gap, reference layer 2 |
| — | 50 ohm, single-ended, Top layer, 6mil trace, reference layer 2 |
| Via Filling | All 0.3mm vias filled and capped per IPC 4761 Type VII |
| Edge Plating | Required |
Layer stack-up
- Type:Copper;Layer No.:1;Thickness (µm):45;Specification:18µm base copper + 25µm plating
- Type:RO4003C;Layer No.:Core;Thickness (µm):203;Specification:IPC-4101/24;Copper;2;38
- Type:FR-4;Layer No.:Prepreg;Thickness (µm):100;Specification:IPC-4101/24;Copper;3;17
- Type:FR-4 S1000-2M;Layer No.:Core;Thickness (µm):240;Specification:IPC-4101/24;Copper;4;35
- Type:FR-4;Layer No.:Prepreg;Thickness (µm):100;Specification:IPC-4101/24;Copper;5;35
- Type:FR-4 S1000-2M;Layer No.:Core;Thickness (µm):240;Specification:IPC-4101/24;Copper;6;17
- Type:FR-4;Layer No.:Prepreg;Thickness (µm):100;Specification:IPC-4101/24;Copper;7;38
- Type:RO4003C;Layer No.:Core;Thickness (µm):200;Specification:IPC-4101/24
- Type:Copper;Layer No.:8;Thickness (µm):45;Specification:18µm base copper + 25µm plating
PCB Statistics
- Components: 41
- Total Pads: 73
- Through Hole Pads: 35
- Top SMT Pads: 26
- Bottom SMT Pads: 12
- Vias: 57
- Nets: 6
Application areas
- Cellular Base Station Antennas
- RF Identification Tags
- Automotive Radar and Sensors
- LNBs for Direct Broadcast Satellites
- Computing, Communication, and Automotive Electronics
Properties
RO4003C Typical Properties
| Property | RO4003C | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.38 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.55 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +40 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 4.2 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.04 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.71 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 11 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 46 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 6.0 (1.05) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Quality Assurance
- Type of Artwork Supplied: Gerber RS-274-X
- Accepted Standard: IPC-Class-2
- Availability: Worldwide
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
