High-Performance 4-Layer HDI PCB Using RO4003C Material
(Custom PCBs are custom-made products, images and specifications are for reference only.)
Brief introduction
(Custom PCBs are tailored products; the images and specifications provided are for reference only.)
Rogers RO4003C is a proprietary, woven glass reinforced hydrocarbon/ceramic material that combines the electrical performance of PTFE with the manufacturability of epoxy/glass. This innovative material is designed for superior high-frequency performance and cost-effective circuit fabrication. RO4003C features low dielectric loss, making it suitable for applications where traditional laminates fall short at higher frequencies. It is ideal for RF microwave circuits, matching networks, and controlled impedance transmission lines.
Technical features & benefits
- Dielectric Constant (Dk): 3.38 ± 0.05 at 10 GHz
- Dissipation Factor: 0.0027 at 10 GHz
- Thermal Conductivity: 0.71 W/m·K
- Thermal Coefficient of Dk: +40 ppm/°C (range: -50°C to 150°C)
- CTE Matched to Copper: 11 ppm/°C (X-axis), 14 ppm/°C (Y-axis)
- Low Z-Axis CTE: 46 ppm/°C
- Glass Transition Temperature (Tg): >280°C
- Low Moisture Absorption: 0.06%
Product images
PCB specifications
| Parameter | Details | |
|---|---|---|
| Base Material | RO4003C | |
| Layer Count | 4 layers | |
| Board Dimensions | 65mm x 65mm (1 PCS, ± 0.15mm) | |
| Minimum Trace/Space | 7/8 mils | |
| Minimum Hole Size | 0.5mm | |
| Blind & Buried Vias | L1-L2, L2-L3 | |
| Finished Board Thickness | 4.8mm | |
| Finished Copper Weight | 1oz (1.4 mils) for inner and outer layers | |
| Via Plating Thickness | 20 µm | |
| Surface Finish | ENEPIG (Electroless Nickel Electroless Palladium Immersion Gold) | |
| Silkscreen侧 | None on both sides | |
| Solder Mask | None on both sides | |
| Countersunk Holes | Yes | |
| Electrical Testing | 100% before shipment | |
Layer stack-up
- Layer:Details
- Copper Layer 1:35 µm
- RO4003C Core:0.508 mm (20 mil)
- Prepreg (RO4450F):0.203 mm (8 mil)
- RO4003C Core:1.524 mm (60 mil)
- Copper Layer 2:35 µm
- Copper Layer 3:35 µm
- Copper Layer 4:35 µm
PCB Statistics
- Components: 6
- Total Pads: 11
- Thru Hole Pads: 5
- Top SMT Pads: 6
- Bottom SMT Pads: 0
- Vias: 5
- Nets: 4
Application areas
- Commercial Airline Broadband Antennas
- Microstrip and Stripline Circuits
- Millimeter Wave Applications
- Radar Systems
- Guidance Systems
- Point-to-Point Digital Radio Antennas
Properties
RO4003C Typical Properties
| Property | RO4003C | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.38 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.55 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +40 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 4.2 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.04 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.71 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 11 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 46 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 6.0 (1.05) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Quality Assurance
- Type of Artwork Supplied: Gerber RS-274-X
- Accepted Standard: IPC-Class-2
- Availability: Worldwide
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
