Advanced 6-Layer Hybrid PCBs with RO4003C and FR-4 for High-Frequency Applications
(Custom PCBs are custom-made products, images and specifications are for reference only.)
Brief introduction
(Custom PCBs are tailored products; the images and specifications provided are for reference only.)
Rogers RO4003C materials are proprietary woven glass reinforced hydrocarbon/ceramics that combine the electrical performance of PTFE/woven glass with the manufacturability of epoxy/glass. These laminates provide tight control over the dielectric constant (Dk) and exhibit low loss, utilizing standard epoxy/glass processing methods at a fraction of the cost of conventional microwave laminates. Unlike PTFE-based materials, RO4003C does not require special through-hole treatments or handling procedures.
RO4003C materials are non-brominated and are not rated UL 94 V-0.
Technical features & benefits
- Dielectric Constant: DK 3.38 ± 0.05 at 10GHz
- Dissipation Factor: 0.0027 at 10GHz
- Thermal Conductivity: 0.71 W/m/°K
- Thermal Coefficient of Dielectric Constant: +40 ppm/°C (ranging -50°C to 150°C)
- CTE Matched to Copper: X-axis 11 ppm/°C, Y-axis 14 ppm/°C
- Low Z-axis CTE: 46 ppm/°C
- Tg: >280°C
- Low Moisture Absorption: 0.06%
Product images
PCB specifications
| Base Material | RO4003C and FR-4 mixed |
| Layer Count | 6 layers |
| Board Dimensions | 83.50mm x 66mm (1 PCS), ± 0.15mm |
| Minimum Trace/Space | 4/4 mils |
| Minimum Hole Size | 0.2mm |
| Blind and Buried Vias | Top layer to inner layer 1 (L2), inner layer 2 to inner layer 3 (L3-L4) |
| Finished Board Thickness | 1.1mm |
| Finished Copper Weight | 1oz (1.4 mils) inner/outer layers |
| Via Plating Thickness | 20 µm |
| Surface Finish | Immersion Gold |
| Top Silkscreen | White |
| Bottom Silkscreen | No |
| Top Solder Mask | Matt Green |
| Bottom Solder Mask | Matt Green |
| Impedance Control | 50 ohm on 4mil / 4mil traces/gaps, top layer |
| Print Series Number | Included |
| Via Filling | 0.2mm vias filled and capped |
| Electrical Testing | 100% electrical test prior to shipment |
Layer stack-up
- Layer:Copper Layer 1;Material:Copper;Thickness:35 µm
- Layer:Copper Layer 2;Material:RO4003C;Thickness:0.305 mm (12 mil)
- Layer:Copper Layer 3;Material:Copper;Thickness:35 µm
- Layer:Prepreg Bondply;Material:1080 RC63%;Thickness:0.0644 mm (2.5 mil)
- Layer:Copper Layer 4;Material:Copper;Thickness:35 µm
- Layer:FR-4;Material:Core;Thickness:0.076 - 0.203 mm (3 mil)
- Layer:Copper Layer 5;Material:Copper;Thickness:35 µm
- Layer:Copper Layer 6;Material:Copper;Thickness:35 µm
- Layer:RO4003C;Material:Core;Thickness:0.305 mm (12 mil)
PCB Statistics
- Components: 51
- Total Pads: 82
- Through Hole Pads: 53
- Top SMT Pads: 29
- Bottom SMT Pads: 0
- Vias: 49
- Nets: 6
Application areas
- Commercial airline broadband antennas
- Microstrip and stripline circuits
- Millimeter wave applications
- Radar systems
- Guidance systems
- Point-to-point digital radio antennas
Properties
RO4003C Typical Properties
| Property | RO4003C | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.38 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.55 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +40 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 4.2 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.04 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.71 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 11 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 46 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 6.0 (1.05) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Quality Assurance
- Type of Artwork Supplied: Gerber RS-274-X
- Accepted Standard: IPC-Class-2
- Availability: Worldwide
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
