BICHENGPCBBicheng Technologies Limited

RO4350B PCB 4-Layer 1.8mm High-Frequency Laminates for Cellular Base Station Antennas

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers RO4350B materials are advanced, proprietary woven glass-reinforced hydrocarbon/ceramics that deliver electrical performance comparable to PTFE/woven glass while benefiting from the manufacturability of epoxy/glass.

RO4350B laminates offer precise control over dielectric constant (Dk) and sustain low loss using standard epoxy/glass processing methods. These laminates are available at significantly lower costs than traditional microwave laminates and do not require the specialized through-hole treatments or handling procedures typical of PTFE-based materials. Additionally, RO4350B materials are UL 94 V-0 rated, making them suitable for high-power RF designs and active devices.

The thermal coefficient of expansion (CTE) of RO4350B provides critical advantages for circuit designers. Its expansion coefficient closely matches that of copper, ensuring excellent dimensional stability, which is essential for mixed dielectric multi-layer board constructions. The low Z-axis CTE of RO4350B laminates guarantees reliable plated through-hole quality, even under severe thermal shock conditions. With a Tg of over 280°C (536°F), the expansion characteristics of RO4350B remain stable across all circuit processing temperatures.

Ideal for multi-layer board (MLB) constructionsProcesses similarly to FR-4 at reduced fabrication costsExcellent dimensional stabilityCompetitively priced

Cellular base station antennas and power amplifiersRF identification tagsAutomotive radar and sensorsLNBs for direct broadcast satellites

RO4350B PCB 4-layer 1.8mm

PCB specifications

Dielectric ConstantDK 3.48 ±0.05 at 10 GHz/23°C
Dissipation Factor0.0037 at 10 GHz/23°C
Thermal Conductivity0.69 W/m/°K
CTEX-axis 10 ppm/°C, Y-axis 12 ppm/°C, Z-axis 32 ppm/°C
High Tg Value>280 °C
Low Water Absorption0.06%
Copper Layer 135 µm
Rogers RO4350B Core0.762 mm (30 mil)
Copper Layer 235 µm
Prepreg (RO4450F)0.102 mm (4 mil)
Copper Layer 335 µm
Rogers RO4350B Core0.762 mm (30 mil)
Copper Layer 435 µm
Board DimensionsStepped 4-layer RF PCB; Outline 1: 70 mm x 50 mm (1 PCS), Outline 2: 70 mm x 40 mm, ±0.15 mm
Minimum Trace/Space4/7 mils
Minimum Hole Size0.3 mm
Stepped OutlineYes
Finished Board Thickness0.5 mm
Finished Copper Weight1 oz (1.4 mils) for outer layers
Via Plating Thickness20 µm
Surface FinishImmersion Gold
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Testing100% electrical test performed prior to shipment
Components9
Total Pads32
Through Hole Pads17
Top SMT Pads15
Bottom SMT Pads0
Vias23
Nets4
Type of Artwork SuppliedGerber RS-274-X
Accepted StandardIPC-Class-2
AvailabilityWorldwide

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com