6-Layer Hybrid PCB 1.3mm RO4350B+FR-4 ENEPIG for RF and Digital Systems
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramics with electrical performance close to PTFE/woven glass and the manufacturability of epoxy/glass.
RO4350B laminates provide tight control on dielectric constant (Dk) and maintain low loss while utilizing the same processing method as standard epoxy/glass. Available at a fraction of the cost of conventional microwave laminates, RO4350B laminates do not require the special through-hole treatments or handling procedures as PTFE based materials. These materials are UL 94 V-0 rated for active devices and high power RF designs.
RO4350B material's thermal coefficient of expansion (CTE) provides several key benefits to the circuit designer. The expansion coefficient of RO4350B material is similar to that of copper which allows the material to exhibit excellent dimensional stability, a property needed for mixed dielectric multi-layer boards constructions. The low Z-axis CTE of RO4350B laminates provides reliable plated through-hole quality, even in severe thermal shock applications. RO4350B material has a Tg of >280°C (536°F) so its expansion characteristics remain stable over the entire range of circuit processing temperatures.
Stable Dielectric Constant: 3.48 ±0.05 at 10GHz/23°C Controlled Loss Characteristics: Dissipation Factor of 0.0037 at 10GHz/23°C Thermal Management: Thermal Conductivity 0.69 W/m/°K Dimensional Stability: X axis CTE 10 ppm/°C, Y CTE 12 ppm/°C, Z CTE 32 ppm/°C High Temperature Performance: High Tg value of >280°C Environmental Resistance: Low water absorption of 0.06%
Enhanced Reliability: Lower Z-Axis CTE for improved through-hole reliability Manufacturing Excellence: Excellent Mechanical Processability and Thermal Resistance Modern Compliance: Lead-free Compatible Quality Assurance: Tg 180°C (DSC), UV Blocking/AOI compatible Thermal Performance: High heat resistance Long-term Reliability: Excellent Anti-CAF performance Environmental Durability: Low water absorption
Optimized Performance: Combined RF and digital circuitry in single board Enhanced Reliability: Excellent dimensional stability for mixed dielectric constructions Cost-Effective Solution: RF performance at fraction of traditional microwave material cost Manufacturing Efficiency: Compatible with standard processing methods Thermal Resilience: Stable performance across wide temperature range
5. PCB Stackup (6-Layer Rigid Structure)
Components: 8 Total Pads: 39 Thru Hole Pads: 21 Top SMT Pads: 12 Bottom SMT Pads: 6 Vias: 23 Nets: 10
Commercial Airline Broadband Antennas Microstrip and Stripline Circuits Millimeter Wave Applications Radar Systems Guidance Systems Point to Point Digital Radio Antennas
Artwork Format: Gerber RS-274-X Accepted Standard: IPC-Class-2 Availability: Worldwide
PCB specifications
Layer stack-up
- Copper Layer 1 · Copper · 35 μmcopper
- Dielectric 1 · RO4350B · 0.102mm (4mil)core
- Copper Layer 2 · Copper · 35 μmcopper
- Dielectric 2 · Prepreg 1080 RC63% + 7628 (43%) · 0.254mm (10mil)core
- Copper Layer 3 · Copper · 35 μmcopper
- Dielectric 3 · S1000-2M · 0.254mm (10mil)core
- Copper Layer 4 · Copper · 35 μmcopper
- Dielectric 4 · Prepreg 1080 RC63% + 7628 (43%) · 0.254mm (10mil)core
- Copper Layer 5 · Copper · 35 μmcopper
- Dielectric 5 · S1000-2M · 0.254mm (10mil)core
- Copper Layer 6 · Copper · 35 μmcopper
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
