RO4350B 2-Layer 16.6mil ENEPIG PCB for High-Frequency RF Applications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramics with electrical performance close to PTFE/woven glass and the manufacturability of epoxy/glass. RO4350B laminates provide tight control on dielectric constant (Dk) and maintain low loss while utilizing the same processing method as standard epoxy/glass. Available at a fraction of the cost of conventional microwave laminates, RO4350B laminates do not require the special through-hole treatments or handling procedures as PTFE based materials. These materials are UL 94 V-0 rated for active devices and high power RF designs.
RO4350B material's thermal coefficient of expansion (CTE) provides several key benefits to the circuit designer. The expansion coefficient of RO4350B material is similar to that of copper which allows the material to exhibit excellent dimensional stability, a property needed for mixed dielectric multi-layer boards constructions. The low Z-axis CTE of RO4350B laminates provides reliable plated through-hole quality, even in severe thermal shock applications. RO4350B material has a Tg of >280°C (536°F) so its expansion characteristics remain stable over the entire range of circuit processing temperatures.
Dielectric Constant (Dk): 3.48 ±0.05 @ 10 GHz/23°C Dissipation Factor: 0.0037 @ 10 GHz/23°C Thermal Conductivity: 0.69 W/m/°K CTE: X: 10 ppm/°C, Y: 12 ppm/°C, Z: 32 ppm/°C Tg: >280°C Moisture Absorption: 0.06% Flammability Rating: UL 94 V-0 Surface Finish: Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG) Board Thickness: 0.5mm (16.6mil core)
Ideal for multi-layer board (MLB) constructions Processes like FR-4 at lower fabrication costs Excellent dimensional stability Competitively priced Suitable for active devices and high power RF designs
Copper layer 1 - 35 μm Rogers RO4350B Core - 0.422 mm (16.6mil) Copper layer 2 - 35 μm
Components: 3 Total Pads: 10 Thru Hole Pads: 6 Top SMT Pads: 4 Bottom SMT Pads: 0 Vias: 5 Nets: 2
Cellular base station antennas and power amplifiers RF identification tags Automotive radar and sensors LNBs for direct broadcast satellites Active devices and high power RF designs
IPC-Class 2 compliant 100% electrical tested Global availability Gerber RS-274X support
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
