BICHENGPCBBicheng Technologies Limited

RO4350B 2-Layer 1.524mm ENIG PCB for Automotive Radar and Base Station

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramic laminates that offer electrical performance comparable to PTFE/woven glass, along with the manufacturability of epoxy/glass. RO4350B laminates provide tight control over dielectric constant (Dk) and maintain low loss, all while using the same processing methods as standard epoxy/glass materials. Available at a fraction of the cost of conventional microwave laminates, RO4350B does not require special through-hole treatments or handling procedures like PTFE-based materials. These laminates are UL 94 V-0 rated, making them suitable for active devices and high-power RF designs.

Stable Dielectric Constant: 3.48 ±0.05 at 10 GHz/23°C Low Loss Characteristics: Dissipation Factor of 0.0037 at 10 GHz/23°C Excellent Thermal Performance: Thermal Conductivity of 0.69 W/m/K Consistent Electrical Properties: Thermal Coefficient of Dk +50 ppm/°C (-50°C to 150°C) Dimensional Stability: CTE X: 10 ppm/°C, Y: 12 ppm/°C, Z: 32 ppm/°C High Temperature Resistance: Tg >280°C Moisture Resistance: Low water absorption of 0.06% Safety Certified: UL 94-V0 Flammability Rating Cost-Effective RF Solution: Comparable performance to PTFE at lower cost

4. PCB Stackup (2-Layer Rigid Structure)

Copper_layer_1 - 35 μmRogers RO4350B Core - 1.524 mm (60mil)Copper_layer_2 - 35 μm

Components: 41Total Pads: 88Thru Hole Pads: 61Top SMT Pads: 27Bottom SMT Pads: 0Vias: 97Nets: 2

Cellular Base Station Antennas and Power AmplifiersRF Identification TagsAutomotive Radar and SensorsLNBs for Direct Broadcast Satellites

Artwork Format: Gerber RS-274-XAccepted Standard: IPC-Class-2Availability: Worldwide

RO4350B PCB

PCB specifications

CategorySpecification
Base MaterialRO4350B
Layer Count2-layer
Board Dimensions80 mm × 75 mm = 1PC, ±0.15 mm
Minimum Trace/Space4/4 mils
Minimum Hole Size0.3 mm
Via TypeThrough-hole only (No Blind Vias)
Board Thickness1.6 mm
Copper Weight1 oz (1.4 mils)
Via Plating Thickness20 μm
Surface FinishImmersion Gold (ENIG)
Top SilkscreenWhite
Bottom SilkscreenNone
Top Solder MaskNone
Bottom Solder MaskNone
Quality Testing100% electrical test prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com