Rogers RO4350B + High Tg FR-4 4-Layer Hybrid PCB with ENIG Finish for RF and Mixed-Signal Applications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- MOQ
- 1PCS
- Lead time
- 7-10 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
RO4350B is a proprietary woven glass reinforced hydrocarbon/ceramic laminate developed by Rogers Corporation, specifically designed to bridge the gap between high-performance PTFE-based materials and standard epoxy/glass laminates. It offers electrical performance close to PTFE/woven glass while maintaining the manufacturability of epoxy/glass materials.
RO4350B laminates provide tight control on dielectric constant (Dk) and maintain low loss while utilizing the same processing methods as standard epoxy/glass. Available at a fraction of the cost of conventional microwave laminates, RO4350B does not require special through-hole treatments or handling procedures required for PTFE-based materials. The material is UL 94 V-0 rated, making it suitable for active devices and high-power RF designs.
The thermal coefficient of expansion (CTE) of RO4350B is similar to that of copper, providing excellent dimensional stability essential for mixed dielectric multilayer board constructions. The low Z-axis CTE ensures reliable plated through-hole quality even in severe thermal shock applications. With a Tg exceeding 280°C, its expansion characteristics remain stable over the entire range of circuit processing temperatures.
Dk 3.48 ± 0.05 at 10 GHz ensures tight impedance control for consistent RF performance Df 0.0037 at 10 GHz minimizes signal loss in high-frequency circuits Thermal conductivity 0.69 W/m/°K enables effective heat dissipation CTE X:10 ppm/°C, Y:12 ppm/°C matched to copper for excellent dimensional stability Z-axis CTE 32 ppm/°C ensures reliable plated through-hole quality under thermal stress Tg >280°C maintains stability throughout circuit processing temperatures Low water absorption 0.06% preserves electrical properties in humid environments UL 94 V-0 rated for safety compliance in active devices and high-power designs Standard epoxy/glass processing eliminates need for special through-hole treatments Cost-effective alternative to PTFE-based microwave laminates
4. PCB Stackup (4-Layer Rigid Structure)
L1 (Top): 1oz Copper, 35μm Core 1: RO4350B, 0.254mm (10mil) L2: 1oz Copper, 35μm Prepreg: 1080 (RC63%) + 7628 (RC43%), 0.254mm (10mil) Core 2: High Tg FR-4, 0.4mm Prepreg: 1080 (RC63%) + 7628 (RC43%), 0.254mm (10mil) L3: 1oz Copper, 35μm Core 3: RO4350B, 0.254mm (10mil) L4 (Bottom): 1oz Copper, 35μm
Components: 17 Total Pads: 45 Thru Hole Pads: 21 Top SMT Pads: 16 Bottom SMT Pads: 8 Vias: 9 Nets: 10
Commercial Airline Broadband Antennas Microstrip and Stripline Circuits Millimeter Wave Applications Radar Systems Guidance Systems Point to Point Digital Radio Antennas Wireless Infrastructure Automotive Radar Sensors Test and Measurement Equipment Aerospace and Defense Communications
Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
