RO4350B 6-Layer 1.6mm PCB with ENIG & Blind Vias for RF/Microwave Applications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramics that offer electrical performance close to PTFE/woven glass along with the manufacturability of epoxy/glass. These laminates provide tight control over dielectric constant (Dk) and maintain low loss characteristics, while being processed using standard epoxy/glass methods. RO4350B materials are available at a fraction of the cost of conventional microwave laminates and do not require special through-hole treatments or handling procedures like PTFE-based materials. They are UL 94 V-0 rated, making them suitable for active devices and high-power RF designs. The thermal expansion coefficient (CTE) of RO4350B is similar to that of copper, ensuring excellent dimensional stability—a critical property for mixed dielectric multi-layer boards. The low Z-axis CTE guarantees reliable plated through-hole quality even under severe thermal shock conditions. With a Tg exceeding 280°C, RO4350B maintains stable expansion properties across all circuit processing temperatures.
Dielectric Constant: 3.48 ±0.05 at 10 GHz/23°C Dissipation Factor: 0.0037 at 10 GHz/23°C Thermal Conductivity: 0.69 W/m/°K CTE: X: 10 ppm/°C, Y: 12 ppm/°C, Z: 32 ppm/°C High Tg: >280°C Low Water Absorption: 0.06% UL 94 V-0 Rated
Ideal for multi-layer board (MLB) constructions Compatible with FR-4 processing at lower fabrication cost Excellent dimensional stability Competitively priced
Copper_layer_1 - 35 μm Rogers RO4350B Core - 0.254 mm (10mil) Copper_layer_2 - 35 μm Prepreg RO4450F X 2 - 0.2mm Copper_layer_3 - 35 μm Rogers RO4350B Core - 0.508 mm (20mil) Copper_layer_4 - 35 μm Prepreg RO4450F X 2 - 0.2mm Copper_layer_5 - 35 μm Rogers RO4350B Core - 0.254 mm (10mil) Copper_layer_6 - 35 μm
Components: 28 Total Pads: 120 Thru Hole Pads: 96 Top SMT Pads: 24 Bottom SMT Pads: 0 Vias: 455 Nets: 12
Cellular Base Station Antennas and Power Amplifiers RF Identification Tags Automotive Radar and Sensors LNBs for Direct Broadcast Satellites
Artwork Format: Gerber RS-274-X Accepted Standard: IPC-Class-2 Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
