BICHENGPCBBicheng Technologies Limited

6-Layer CuClad 217 RF PCB with 3.5mm Thick Core and ENIG Finish

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

1.Product Introduction: High-Performance PTFE Composite

Rogers CuClad 217 represents a premium cross-plied, woven fiberglass reinforced PTFE composite laminate, engineered to deliver the industry's lowest dielectric constant (Dk=2.17/2.20) among fiberglass-PTFE materials. This 6-layer construction utilizes a unique alternating ply orientation (90° fiberglass weave) combined with high PTFE content to achieve exceptional electrical isotropy and signal integrity for mission-critical RF applications. The material's optimized fiberglass/PTFE ratio enables faster signal propagation and superior signal-to-noise ratios compared to conventional PTFE laminates.

Ultra-Low Dielectric Constant: 2.17/2.20 @10GHz/1MHz Minimal Signal Loss: 0.0009 dissipation factor @10GHz Environmental Stability: 0.02% moisture absorption Mechanical Reliability: 14 lbs/in peel strength Space-Qualified: TML 0.01%, CVCM 0.01% outgassing Thermal Performance: -55°C to +150°C operational range

Copper layer 1 - 35 μm Rogers CuClad 217 Core - 1.575 mm (62mil) Copper layer 2 - 35 μm Bonding ply - RF-27 -0.05mm Copper layer 3 - 35 μm Rogers CuClad 217 Core - 0.787 mm (31mil) Copper layer 4 - 35 μm Bonding ply - RF-27 -0.05mm Copper layer 5 - 35 μm Rogers CuClad 217 Core - 0.787 mm (31mil) Copper layer 6 - 35 μm

Components: 31 Total Pads: 143 Thru Hole Pads: 116 Top SMT Pads: 27 Bottom SMT Pads: 0 Vias: 39 Nets: 2

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class 2 Availability: Worldwide shipping

Cross-Plied Construction: 90° alternating weave for uniform Dk High PTFE Content: Lowest loss among fiberglass-PTFE laminates Blind Via Capability: L1-L4 microvia integration Space-Qualified: Meets NASA outgassing standards Design Flexibility: Supports wider traces for reduced insertion loss

Radars Electronic Countermeasures Electronic Support Measures Microwave Components (LNAs, filters, couplers, etc.)

PCB specifications

Base MaterialCuClad 217 / RF-27 Prepreg
Layer Count6-Layer
Board Dimensions68.45mm × 97.18mm (±0.15mm)
Minimum Trace/Space5/7 mils
Minimum Hole Size0.4mm
Via ConfigurationL1-L4 Blind Vias + Through-hole
Finished Thickness3.5mm
Copper Weight1oz (35μm) all layers
Via Plating Thickness20μm
Surface FinishImmersion Gold (ENIG)
Top SilkscreenWhite
Bottom SilkscreenNone
Top Solder MaskGreen
Bottom Solder MaskNone
Electrical Testing100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com