BICHENGPCBBicheng Technologies Limited

Rogers CuClad 217 2-Layer 20mil ENIG PCB for Microwave & Radar Systems

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

MOQ
1PCS
Lead time
5-10 working days
Packaging
Vacuum / Anti-static Packaging
Payment
T/T, Paypal

Brief introduction

Rogers CuClad 217 laminates are cross plied, woven fiberglass and precisely controlled PTFE composite laminates that offer low dielectric constant values of 2.17 or 2.20. CuClad 217 laminate's cross plied construction provides in-plane electrical and mechanical isotropy. CuClad 217 uses a low fiberglass/PTFE ratio to provide the lowest dielectric constant (Dk) and dissipation factor available in fiberglass reinforced PTFE based laminates. Together, these properties offer faster signal propagation and higher signal/noise ratios.

Dielectric Constant of DK 2.17 or 2.2 at 10GHz / 1MHz Dissipation Factor of 0.0009 at 10GHz Low Moisture Absorption of 0.02% Strong Peel Strength of 14 lbs/in Low outgassing Total Mass Loss (TML) 0.01%, Collected Volatile Condensable Material (CVCM) 0.01% and 0 Water Vapor Regain (WVR) Cross Plied Woven Fiberglass, alternating plies are oriented 90 degree to each other High PTFE to Glass Ratio Better dielectric constant uniformity than comparable non-woven fiberglass reinforced laminates

Stable Dk over a wide frequency range Low Dk supports wider line widths for lower insertion loss Low circuit losses at high frequency Design flexibility in PCB fabrication benefits from improved dimensional stability Enables designers to meet strict specifications Electrical and Mechanical Isotropy in the X-Y Plane Well Suited for Dk Sensitive Circuits

Copper Layer 1 - 35 μm Rogers CuClad 217 Core - 0.508 mm (20mil) Copper Layer 2 - 35 μm

Components: 25 Total Pads: 130 Thru Hole Pads: 105 Top SMT Pads: 25 Bottom SMT Pads: 0 Vias: 45 Nets: 2

Radars Electronic Countermeasures Electronic Support Measures Microwave Components (LNAs, filters, couplers, etc.)

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

Rogers CuClad 217 2-Layer PCB

PCB specifications

Base MaterialCuClad 217
ManufacturerRogers Corporation
Layer Count2 layers
Board Dimensions89mm × 56mm = 1PC, ±0.15mm
Minimum Trace/Space4/5 mils
Minimum Hole Size0.2mm
Blind ViasNo
Finished Board Thickness0.6mm
Finished Cu Weight1oz (1.4 mils) outer layers
Via Plating Thickness20 μm
Surface FinishImmersion Gold
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskBlue
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com