CuClad 250 PCB 2-Layer 20mil High-Frequency PTFE Laminates for Radar and Microwave Components
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers CuClad 250 laminates are high-performance, cross-plied woven fiberglass and PTFE composite materials. These laminates feature low dielectric constants ranging from 2.40 to 2.55 at 10GHz. With a higher fiberglass/PTFE ratio, CuClad 250 provides mechanical properties comparable to conventional substrates, ensuring excellent dimensional stability and reduced thermal expansion in all directions.
Dielectric Constant DK 2.4 - 2.55 at 10GHz / 1MHz Dissipation Factor 0.0017 at 10GHz Low Moisture Absorption 0.03% Strong Peel Strength 14 lbs/in Low outgassing Performance Total Mass Loss (TML): 0.01% Collected Volatile Condensable Material (CVCM): 0.0% Water Vapor Regain (WVR): 0% Construction Cross-plied woven fiberglass with alternating plies oriented at 90 degrees High PTFE to Glass Ratio
Balanced electrical and mechanical properties due to cross-plied construction Low Dk allows for wider line widths, minimizing insertion loss Reduced circuit losses at high frequencies Improved dielectric constant uniformity compared to non-woven fiberglass laminates Ideal for Er-sensitive circuits
Radars, Electronic Countermeasures, Electronic Support Measures Microwave Components (LNAs, filters, couplers, etc.)
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
