BICHENGPCBBicheng Technologies Limited

CuClad 233 2-Layer 20mil PCB – High-Frequency RF Board with Immersion Gold Finish

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers CuClad 233 laminates are cross-piled, woven fiberglass and PTFE composite materials offering a low dielectric constant value of 2.33. These laminates utilize a medium fiberglass/PTFE ratio to balance low dielectric constant (Dk) and improved dissipation factor without compromising mechanical properties. The cross-piled construction ensures greater dimensional stability along with balanced electrical and mechanical performance.

Dielectric Constant (Dk) of 2.33 at 10GHz / 1MHz Dissipation Factor of 0.0013 at 10GHz Low Moisture Absorption of 0.02% Strong Peel Strength of 14 lbs/in Low Outgassing: TML 0.01%, CVCM 0.01%, WVR 0% Cross-Plied Woven Fiberglass with 90° alternating plies High PTFE to Glass Ratio Superior dielectric constant uniformity compared to non-woven reinforced laminates

Stable Dk over a wide frequency range Supports wider line widths for reduced insertion loss Low circuit losses at high frequencies Suitable for large PCBs and antenna formats CTE in-plane matches aluminum for aerospace applications

Copper_layer_1 - 35 μm Rogers CuClad 233 Core - 0.508 mm (20mil) Copper_layer_2 - 35 μm

Components: 35 Total Pads: 127 Thru Hole Pads: 73 Top SMT Pads: 54 Bottom SMT Pads: 0 Vias: 99 Nets: 2

Radars, Electronic Countermeasures, Electronic Support Measures Microwave Components (LNAs, filters, couplers, etc.)

IPC-Class 2 compliant 100% electrical tested Global availability Gerber RS-274X support

CuClad 233 PCB

PCB specifications

ParameterValue / Specification
Base MaterialCuClad 233
Layer Count2-layer
Board Dimensions108 mm x 59 mm (±0.15mm)
Minimum Trace/Space6/8 mils
Minimum Hole Size0.3 mm
Blind ViasNo
Finished Board Thickness0.6 mm
Finished Cu Weight1 oz (1.4 mils) outer layers
Via Plating Thickness20 μm
Surface FinishImmersion Gold
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com