BICHENGPCBBicheng Technologies Limited

Rogers CuClad 233 DK2.33 Df0.0013 PTFE PCB Board Material

Brief introduction

The CuClad series from Rogers Corporation is a line of PTFE/Woven Fiberglass laminates designed as microwave printed circuit board substrates. CuClad 233 features a medium fiberglass/PTFE ratio, balancing a low dielectric constant and improved dissipation factor without sacrificing mechanical properties. It provides true electrical and mechanical isotropy in the XY plane, a unique feature critical for applications like phased array antennas.

Technical features & benefits

  1. 1.Cross-Plied Woven Fiberglass: Alternating plies oriented 90° to each other for true isotropy in the X-Y plane.
  2. 2.High PTFE to Glass Ratio: Enables excellent electrical performance with low dielectric loss.
  3. 3.Better Dielectric Constant Uniformity: Superior to comparable non-woven fiberglass reinforced laminates.
  4. 4.Electrical and Mechanical Isotropy in the X-Y Plane: Critical for sensitive circuit designs like phased array antennas.
  5. 5.Extremely Low Loss: Df of 0.0013 at 10 GHz ensures high signal integrity.
  6. 6.Well Suited for Er (Dielectric Constant) Sensitive Circuits: Provides predictable and repeatable performance.

Application areas

  • Military Electronics (Radars, ECM, ESM): High-reliability systems demanding consistent performance.
  • Microwave Components (LNAs, filters, couplers, etc.): Building blocks for RF front-ends.
  • Phased Array Antennas: Requires true XY isotropy for accurate beam steering.
  • Other high-frequency applications requiring electrical/mechanical isotropy and low loss: General-purpose high-performance circuits.
Rogers CuClad 233 Laminate

Typical properties: CuClad 233

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
CuClad 233
PropertyTest MethodConditionCuClad 233
Electrical Properties
Dielectric Constant @10 GHzIPC TM-650 2.5.5.5C23/502.33
Dielectric Constant @1 MHzIPC TM-650 2.5.5.3C23/502.33
Dissipation Factor @10 GHzIPC TM-650 2.5.5.5C23/500.0013
Thermal Coefficient of Er (ppm/°C)IPC TM-650 2.5.5.5 Adapted-10°C to +140°C-161
Volume Resistivity (MΩ·cm)IPC TM-650 2.5.17.1C96/35/908.0 x 10⁸
Surface Resistivity (MΩ)IPC TM-650 2.5.17.1C96/35/902.4 x 10⁶
Arc Resistance (seconds)ASTM D-495D48/50>180
Dielectric Breakdown (kV)ASTM D-149D48/50>45
Mechanical Properties
Peel Strength (lbs/inch)IPC TM-650 2.4.8After Thermal Stress14
Tensile Modulus (kpsi)ASTM D-638A, 23°C510, 414
Tensile Strength (kpsi)ASTM D-882A, 23°C10.3, 9.8
Compressive Modulus (kpsi)ASTM D-695A, 23°C276
Flexural Modulus (kpsi)ASTM D-790A, 23°C371
Physical & Thermal Properties
Specific Gravity (g/cm³)ASTM D-792 Method AA, 23°C2.26
Water Absorption (%)MIL-S-13949H 3.7.7 / IPC TM-650 2.6.2.2E1/105 + D24/230.02
Coefficient of Thermal Expansion (ppm/°C)IPC TM-650 2.4.24 / Mettler 3000 TMA0°C to 100°CX Axis: 23Y Axis: 24Z Axis: 194
Thermal ConductivityASTM E-1225100°C0.26
Outgassing (Total Mass Loss %)NASA SP-R-0022A125°C, ≤ 10⁻⁶ torr0.01
FlammabilityUL 94 Vertical Burn / IPC TM-650 2.3.10C48/23/50, E24/125Meets requirements of UL94-V0

Available configurations

  • Cladding: Typically supplied with ½ oz, 1 oz, or 2 oz electrodeposited copper on both sides. Other copper weights and rolled copper foil are available.
  • Bonded to Metal Ground Plane: CuClad can be bonded to aluminum, brass, or copper plates for integrated heat sinking and mechanical support.
  • Master Sheet Sizes: 36" x 36" (cross-piled configuration), 36" x 48" (parallel-piled configuration).
  • Special Consideration: For critical performance applications, an "LX" testing grade can be specified, where each sheet is individually tested with a report provided (at a higher price).
  • When ordering: Specify dielectric constant, thickness, cladding, panel size, and any special requirements.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com