TC350 Rogers RF PCB Built on 30mil Double Sided Core With Immersion Gold for Tower Mounted Amplifiers
(Note: Printed Circuit Boards are custom-made products; the images and specifications shown are for reference only.)
Brief introduction
Rogers' TC350 is a composite material made from woven fiberglass reinforced, ceramic-filled, and PTFE-based components, specifically designed for printed circuit board (PCB) applications. It aims to enhance heat transfer with "Best-In-Class" thermal conductivity while minimizing dielectric and insertion losses. This reduction in losses leads to improved amplifier and antenna efficiencies.
Technical features & benefits
- Enhanced Thermal Conductivity: 0.72 W/mK enables higher power handling, reduces hot spots, and enhances device reliability. This results in lower junction temperatures and prolongs the lifespan of active components.
- Excellent Dielectric Constant Stability: TC350 exhibits strong dielectric constant stability across a wide temperature range. This stability assists power amplifier and antenna designers in maximizing gain and minimizing bandwidth loss.
- Strong Bond to Copper: TC350 forms a robust bond with microwave-grade, low-profile copper, resulting in reduced insertion loss due to skin effect losses, particularly at higher RF and microwave frequencies.
Product images
Application areas
- Microwave combiners and power dividers
- Power amplifiers, filters, and couplers
- Tower-mounted amplifiers (TMA) and tower-mounted boosters (TMB)
- Thermally cycled antennas sensitive to dielectric drift
Our PCB Capability
PCB Capability (TC350)
| PCB Material: | Woven Fiberglass Reinforced, Ceramic Filled, PTFE based Composite |
| Designation: | TC350 |
| Dielectric constant: | 3.50 ± 0.05 |
| Thermal Conductivity: | 0.72 W/m-K |
| Dissipation Factor: | Df 0.0020 @ 10 GHz |
| Layer count: | Single Layer, Double Layer, Multi-layer, Hybrid PCB |
| Copper weight: | 1oz (35µm), 2oz (70µm) |
| PCB thickness: | 10mil, 20mil, 30mil, 60mil |
| Surface finish: | Bare copper, HASL, ENIG, OSP, Immersion silver, Immersion tin, ENEPIG, Pure gold etc. |
Properties
TC350 Typical Properties
| Property | TC350 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.50 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dissipation Factor | 0.0020 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -9 | — | ppm/°C | -40 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 7.4 × 10⁶ | — | MΩ·cm | C96/35/90 | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 3.2 × 10⁷ | — | MΩ | C96/35/90 | IPC-TM-650 2.5.17.1 |
| Dielectric Breakdown | 40 | — | kV | — | IPC-TM-650 2.5.6 |
| Decomposition Temp (Td, initial) | 520 | — | °C | TGA | IPC-TM-650 2.4.24.6 |
| Decomposition Temp (Td, 5% loss) | 567 | — | °C | TGA | IPC-TM-650 2.4.24.6 |
| CTE (X) | 7 | X | ppm/°C | 50–150°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 7 | Y | ppm/°C | 50–150°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 23 | Z | ppm/°C | 50–150°C | IPC-TM-650 2.4.41 |
| Z-axis Expansion | 1.2 | — | % | 50–260°C | IPC-TM-650 2.4.24 |
| Thermal Conductivity | 0.72 | Z | W/(m·K) | — | ASTM D5470 |
| Copper Peel Strength | 7.0 (1.2) | — | lbs/in (N/mm) | 35 μm foil, after thermal stress | IPC-TM-650 2.4.8 |
| Moisture Absorption | 0.05 | — | % | — | IPC-TM-650 2.6.2.1 |
| Density | 2.3 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL 94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
