Rogers TC350 Double Sided High Frequency PCB Built On 10mil Core With Immersion Gold for Microwave Combiners
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
Technical features & benefits
- Enhanced Thermal Conductivity: TC350's increased thermal conductivity allows for better power handling, mitigates hot spots, and improves the reliability of devices. This leads to lower junction temperatures and extends the lifespan of active components, crucial for improving power amplifier reliability, increasing mean time between failures (MTBF), and cutting warranty costs.
- Dielectric Constant Stability: TC350 maintains excellent dielectric constant stability over a wide temperature range. This characteristic helps power amplifier and antenna designers optimize gain and minimize bandwidth loss that can occur due to dielectric constant fluctuations with temperature changes.
- Strong Copper Bonding: The material forms a robust bond with copper, utilizing microwave-grade, low-profile copper. This bond minimizes insertion loss caused by skin effect losses that are more pronounced at higher RF and microwave frequencies.
Application areas
TC350 is well-suited for a variety of PCB applications, including:
- Microwave combiners and power dividers
- Power amplifiers, filters, and couplers
- Tower-mounted amplifiers (TMA) and tower-mounted boosters (TMB)
- Thermally cycled antennas sensitive to dielectric drift
Our PCB Capability
Our PCB Capability (TC350)
| PCB Material: | Woven Fiberglass Reinforced, Ceramic Filled, PTFE based Composite |
| Designation: | TC350 |
| Dielectric constant: | 3.5±0.05 |
| Thermal Conductivity | 0.72 W/m-K |
| Dissipation Factor | Df .002@10 GHz |
| Layer count: | Single Layer, Double Layer, Multi-layer, Hybrid PCB |
| Copper weight: | 1oz, 2oz |
| PCB thickness: | 10mil, 20mil, 30mil, 60mil |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface finish: | Bare copper, HASL, ENIG, OSP, Immersion silver, Immersion tin, ENEPIG, Pure gold etc. |
Properties
TC350 Typical Properties
| Property | TC350 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.50 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dissipation Factor | 0.0020 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -9 | — | ppm/°C | -40 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 7.4 × 10⁶ | — | MΩ·cm | C96/35/90 | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 3.2 × 10⁷ | — | MΩ | C96/35/90 | IPC-TM-650 2.5.17.1 |
| Dielectric Breakdown | 40 | — | kV | — | IPC-TM-650 2.5.6 |
| Decomposition Temp (Td, initial) | 520 | — | °C | TGA | IPC-TM-650 2.4.24.6 |
| Decomposition Temp (Td, 5% loss) | 567 | — | °C | TGA | IPC-TM-650 2.4.24.6 |
| CTE (X) | 7 | X | ppm/°C | 50–150°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 7 | Y | ppm/°C | 50–150°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 23 | Z | ppm/°C | 50–150°C | IPC-TM-650 2.4.41 |
| Z-axis Expansion | 1.2 | — | % | 50–260°C | IPC-TM-650 2.4.24 |
| Thermal Conductivity | 0.72 | Z | W/(m·K) | — | ASTM D5470 |
| Copper Peel Strength | 7.0 (1.2) | — | lbs/in (N/mm) | 35 μm foil, after thermal stress | IPC-TM-650 2.4.8 |
| Moisture Absorption | 0.05 | — | % | — | IPC-TM-650 2.6.2.1 |
| Density | 2.3 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL 94 |
Rogers TC350 Overview
Rogers' TC350 is a composite material made from woven fiberglass reinforced, ceramic-filled, and PTFE-based components, specifically designed for printed circuit board (PCB) applications. It offers exceptional thermal conductivity, reducing both dielectric and insertion losses, which enhances amplifier and antenna performance.
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
