BICHENGPCBBicheng Technologies Limited

Double Sided PCB Built On 60mil Rogers TC350 With Immersion Gold for Thermally Cycled Antennas

(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)

Brief introduction

Rogers' TC350 is a woven fiberglass reinforced, ceramic-filled, PTFE-based composite material designed for printed circuit board (PCB) applications. It is engineered for enhanced heat transfer through "Best-In-Class" thermal conductivity, while minimizing dielectric and insertion losses. This reduction in losses leads to improved amplifier and antenna efficiencies.

Technical features & benefits

  • Enhanced Thermal Conductivity: TC350's high thermal conductivity allows for increased power handling, reduces hot spots, and improves device reliability. This results in lower junction temperatures and extends the life of active components, which is crucial for enhancing power amplifier reliability, increasing mean time between failures (MTBF), and minimizing warranty costs.
  • Excellent Dielectric Constant Stability: TC350 demonstrates outstanding dielectric constant stability across a wide temperature range, aiding power amplifier and antenna designers in maximizing gain and minimizing bandwidth loss due to dielectric constant drift as operating temperatures change.
  • Strong Bond to Copper: The material forms a robust bond with microwave-grade, low-profile copper, resulting in even lower insertion loss due to skin effect losses, which are particularly significant at higher RF and microwave frequencies.

Product images

TC350 PCB
TC350 PCB detail

Application areas

  • Microwave combiners and power dividers
  • Power amplifiers, filters, and couplers
  • Tower-mounted amplifiers (TMA) and tower-mounted boosters (TMB)
  • Thermally cycled antennas sensitive to dielectric drift

Our PCB Capability

Our PCB Capability (TC350)

PCB Material:Woven Fiberglass Reinforced, Ceramic Filled, PTFE based Composite
Designation:TC350
Dielectric constant:3.5±0.05
Thermal Conductivity0.72 W/m-K
Dissipation FactorDf .002@10 GHz
Layer count:Single Layer, Double Layer, Multi-layer, Hybrid PCB
Copper weight:1oz, 2oz
PCB thickness:10mil, 20mil, 30mil, 60mil
PCB size:≤400mm X 500mm
Solder mask:Green, Black, Blue, Yellow, Red etc.
Surface finish:Bare copper, HASL, ENIG, OSP, Immersion silver, Immersion tin, ENEPIG, Pure gold

Properties

TC350 Typical Properties

PropertyTC350Dir.UnitsConditionTest Method
Dielectric Constant (Process)3.50 ± 0.05Z—10 GHzIPC-TM-650 2.5.5.5
Dissipation Factor0.0020Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk-9—ppm/°C-40 to 150°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity7.4 × 10⁶—MΩ·cmC96/35/90IPC-TM-650 2.5.17.1
Surface Resistivity3.2 × 10⁷—MΩC96/35/90IPC-TM-650 2.5.17.1
Dielectric Breakdown40—kV—IPC-TM-650 2.5.6
Decomposition Temp (Td, initial)520—°CTGAIPC-TM-650 2.4.24.6
Decomposition Temp (Td, 5% loss)567—°CTGAIPC-TM-650 2.4.24.6
CTE (X)7Xppm/°C50–150°CIPC-TM-650 2.4.41
CTE (Y)7Yppm/°C50–150°CIPC-TM-650 2.4.41
CTE (Z)23Zppm/°C50–150°CIPC-TM-650 2.4.41
Z-axis Expansion1.2—%50–260°CIPC-TM-650 2.4.24
Thermal Conductivity0.72ZW/(m·K)—ASTM D5470
Copper Peel Strength7.0 (1.2)—lbs/in (N/mm)35 μm foil, after thermal stressIPC-TM-650 2.4.8
Moisture Absorption0.05—%—IPC-TM-650 2.6.2.1
Density2.3—g/cm³—ASTM D792
FlammabilityV-0———UL 94

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com