Rogers AD250C Microwave and RF PCB - 20mil 30mil 60mil Antenna Material with Dielectric Constant (DK) of 2.50
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- Material
- Rogers AD250C (PTFE-based Woven Fiberglass/Ceramic Filled) / 20-60mil
- MOQ
- 1PCS
- Lead time
- 7-13 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
(Printed Circuit Boards are custom-made products; the images and parameters shown are for reference only.)
The Rogers AD250C Microwave and RF PCB is a high-performance circuit board designed for antenna applications. Built on Rogers AD250C laminates, this PCB features PTFE-based composites with woven fiberglass and micro-dispersed ceramic fillers, offering a controlled dielectric constant of 2.50 ± 0.04 and a low loss tangent of 0.0014 at 10 GHz. The use of low-profile reverse-treated ED copper foil reduces conductive losses and passive intermodulation (PIM), making it ideal for telecommunication infrastructure and antenna systems. Available in 20mil, 30mil, and 60mil thicknesses, this PCB is a cost-effective solution for high-frequency applications.
1. Low Dielectric Constant (DK 2.50): Controlled Dk for consistent high-frequency performance. 2. Low Dissipation Factor (Df 0.0014 @10GHz): Minimizes signal loss for high-efficiency transmission. 3. Excellent PIM Performance: -159dBc to -163dBc, ideal for demanding wireless infrastructure. 4. Multiple Thickness Options: Available in 20mil, 30mil, and 60mil. 5. Low-Profile Copper Foil: Reduces conductive losses and PIM. 6. PTFE-Based Composite: Provides excellent electrical and mechanical properties.
1. Automotive Telematics Antenna Systems2. Base Station Antenna Applications3. Cellular Infrastructure Base Station Antennas4. Commercial Satellite Radio Antennas5. Digital Audio Broadcasting (DAB) Antennas6. Radar Manifolds and Feed Networks
PCB specifications
PCB Capability (AD250C)
Typical properties: AD250C
Material-level dielectric and mechanical properties, distinct from the board-level specifications above.
Open the standalone data sheet (printable)| Properties | Typical Value | Units | Test Conditions | Test Method |
|---|---|---|---|---|
| Electrical Properties | ||||
| Dielectric Constant (process) | 2.50 | - | 23°C @ 50% RH, 10 GHz | IPC TM-650 2.5.5.5 |
| Dissipation Factor | 0.0013 | - | 23°C @ 50% RH, 10 GHz | IPC TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -117 | ppm/°C | 0 to 100°C, 10 GHz | IPC TM-650 2.5.5.5 |
| Volume Resistivity | 4.8 x 10⁸ | MΩ·cm | C96/35/90 | IPC TM-650 2.5.17.1 |
| Surface Resistivity | 4.1 x 10⁷ | MΩ | C96/35/90 | IPC TM-650 2.5.17.1 |
| Electrical Strength | 979 | V/mil | - | IPC TM-650 2.5.6.2 |
| Dielectric Breakdown | >40 | kV | D-48/50, X/Y direction | IPC TM-650 2.5.6 |
| PIM | -159/-163 | dBc | Reflected 43 dBm swept tones at 1900 MHz | Rogers Internal 50 ohm |
| Thermal Properties | ||||
| Decomposition Temperature (Td) | >500 | °C | 2hrs @ 105°C, 5% Weight Loss | IPC TM-650 2.3.40 |
| CTE - x | 47 | ppm/°C | -55°C to 288°C | IPC TM-650 2.4.41 |
| CTE - y | 29 | ppm/°C | -55°C to 288°C | IPC TM-650 2.4.41 |
| CTE - z | 196 | ppm/°C | -55°C to 288°C | IPC TM-650 2.4.41 |
| Thermal Conductivity | 0.33 | W/(m·K) | z direction | ASTM D5470 |
| Time to Delamination | >60 | minutes | as-received, 288°C | IPC TM-650 2.4.24.1 |
| Mechanical Properties | ||||
| Copper Peel Strength | 2.6 (14.8) | N/mm (lbs/in) | 10s @ 288°C, 35 μm foil | IPC TM-650 2.4.8 |
| Flexural Strength (MD/CMD) | 60.7/44.1 (8.8/6.4) | MPa (ksi) | 25°C ± 3°C | ASTM D790 |
| Tensile Strength (MD, CMD) | 41.4/38.6 (6.0/5.6) | MPa (ksi) | 23°C @ 50% RH | ASTM D3039 |
| Flex Modulus | 6,102/5,364 (885/778) | MPa (ksi) | 25°C ± 3°C | IPC-TM-650 2.4.4 |
| Physical Properties | ||||
| Flammability | V-0 | - | - | UL 94 |
| Moisture Absorption | 0.04 | % | E1/105 + D48/50 | IPC TM-650 2.6.2.1 |
| Density | 2.28 | g/cm³ | C24/23/50 | ASTM D792 |
| Specific Heat Capacity | 0.813 | J/g·°K | 2 hours at 105°C | ASTM E2716 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
