BICHENGPCBBicheng Technologies Limited

Rogers AD250C RF and Microwave PCB - 60mil (1.524mm) Substrate with Immersion Gold

(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)

Brief introduction

The Rogers AD250C RF and Microwave PCB is a double-layer high-frequency circuit board designed for demanding antenna and RF applications. Built on Rogers AD250C substrates with a dielectric constant of 2.50 ± 0.04 and a low dissipation factor of 0.0013, this PCB offers exceptional performance for high-frequency systems. The board is 60mil (1.524mm) thick with 1oz copper on both sides, featuring immersion gold on the pads for excellent solderability. Designed with a size of 90mm x 90mm, it is manufactured in compliance with IPC Class II standards and undergoes 100% electrical testing before shipment.

Technical features & benefits

  • Very Low Loss: PTFE and ceramic-filled composite with a loss tangent of 0.0014 at 10 GHz.
  • Controlled Dielectric Constant (Dk): 2.50 ± 0.04 for consistent signal integrity.
  • Low Profile Copper: Reduces conductive losses and improves antenna efficiency.
  • Low PIM Performance: Ideal for antenna applications, ensuring minimal signal distortion.
  • High Production Capacity: 16,000㎡ workshop with a monthly output of 30,000㎡.
  • Certified Manufacturing: ISO9001, ISO14001, IATF16949, ISO13485, and UL certified.

Product images

AD250C PCB

PCB specifications

PCB SIZE90mm x 90mm = 1 piece
BOARD TYPEHigh Frequency PCB
Number of Layers2 layers
Surface Mount ComponentsYES
Through Hole ComponentsN/A
Minimum Trace and Space:80 mil
Minimum / Maximum Holes:1.0 mm / 2.8 mm
Number of Drill Holes:9
Surface FinishImmersion Gold, 73.6%
Solder Mask Apply To:Both sides
Final height of PCB:1.6 mm ±0.1
TEST100% Electrical Test prior shipment
SERVICE AREAWorldwide, Globally

Layer stack-up

  • copper - 35um(1 oz)+plate top layer
  • AD250C 1.524mm
  • copper - 35um(1 oz)+plate bot layer

Application areas

  • Cellular Infrastructure Base Station Antennas
  • Automotive Telematics Antenna Systems
  • Commercial Satellite Radio Antennas

Properties

AD250C Typical Properties

PropertyAD250CDir.UnitsConditionTest Method
Dielectric Constant (Design)2.50——10 GHzMicrostrip / Differential Phase Length
Dissipation Factor0.0013——10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk-117—ppm/°C0 to 100°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity4.8 × 10⁸—MΩ·cmC96/35/90IPC-TM-650 2.5.17.1
Dielectric Breakdown>40—kVD-48/50IPC-TM-650 2.5.6
Td>500—°C2 hrs @ 105°CIPC-TM-650 2.3.40
CTE (X)47Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)29Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)196Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Thermal Conductivity0.33ZW/(m·K)—ASTM D5470
Copper Peel Strength2.6 (14.8)—N/mm (lbs/in)10s @ 288°CIPC-TM-650 2.4.8
Moisture Absorption0.04—%E1/105+D48/50IPC-TM-650 2.6.2.1
Density2.28—g/cm³C24/23/50ASTM D792
FlammabilityV-0———UL94

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com