AD255C High Frequency Antenna PCB - 20mil 30mil 40mil 60mil Thickness with Immersion Gold and Immersion Silver
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- Material
- Rogers AD255C (Glass-reinforced PTFE) / 20-60mil
- MOQ
- 1PCS
- Lead time
- 5-12 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
The AD255C High Frequency Antenna PCB is a high-performance circuit board designed for wireless antenna applications. Built on Rogers' AD255C substrates, this PCB features a glass-reinforced, PTFE-based composite that provides a controlled dielectric constant (Dk 2.55) and low loss performance (Df 0.0013 at 10 GHz). With excellent passive intermodulation (PIM) performance, the AD255C PCB is ideal for demanding wireless antenna markets. Available in thicknesses ranging from 20mil to 60mil, it offers immersion gold or immersion silver surface finishes for superior solderability and corrosion resistance.
1. Low Dielectric Constant (Dk 2.55): Controlled Dk for consistent high-frequency performance. 2. Low Dissipation Factor (Df 0.0013 @10GHz): Minimizes signal loss for high-efficiency transmission. 3. Excellent PIM Performance: -159dBc to -163dBc, ideal for demanding wireless infrastructure. 4. Multiple Thickness Options: Available in 20mil, 30mil, 40mil, 60mil, and 125mil. 5. Superior Surface Finishes: Immersion gold and immersion silver for excellent solderability. 6. Glass-Reinforced PTFE Construction: Provides excellent dimensional stability.
1. Automotive Telematics Antenna Systems 2. Cellular Infrastructure Base Station Antennas 3. Commercial Satellite Radio Antennas
PCB specifications
PCB Capability (AD255C)
Typical properties: AD255C
Material-level dielectric and mechanical properties, distinct from the board-level specifications above.
Open the standalone data sheet (printable)| Properties | Typical Value | Units | Test Conditions | Test Method |
|---|---|---|---|---|
| Electrical Properties | ||||
| Dielectric Constant (process) | 2.55 | - | 23°C @ 50% RH, 10 GHz | IPC TM-650 2.5.5.5 |
| Dielectric Constant (design) | 2.60 | - | C-24/23/50, 10 GHz | Microstrip Differential Phase Length |
| Dissipation Factor | 0.0013 | - | 23°C @ 50% RH, 10 GHz | IPC TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -110 | ppm/°C | 0 to 100°C, 10 GHz | IPC TM-650 2.5.5.5 |
| Volume Resistivity | 7.4 x 10⁸ | MΩ·cm | C96/35/90 | IPC TM-650 2.5.17.1 |
| Surface Resistivity | 3.6 x 10⁷ | MΩ | C96/35/90 | IPC TM-650 2.5.17.1 |
| Electrical Strength | 911 | V/mil | - | IPC TM-650 2.5.6.2 |
| Dielectric Breakdown | >40 | kV | D-48/50, X/Y direction | IPC TM-650 2.5.6 |
| PIM² | -159 / -163 | dBc | Reflected 43 dBm swept tones at 1900 MHz S1/S1 | Rogers Internal 50 ohm |
| Thermal Properties | ||||
| Decomposition Temperature (Td) | >500 | °C | 2hrs @ 105°C, 5% Weight Loss | IPC TM-650 2.3.40 |
| CTE - x | 34 | ppm/°C | -55°C to 288°C | IPC TM-650 2.4.41 |
| CTE - y | 26 | ppm/°C | -55°C to 288°C | IPC TM-650 2.4.41 |
| CTE - z | 196 | ppm/°C | -55°C to 288°C | IPC TM-650 2.4.41 |
| Thermal Conductivity | 0.35 | W/(m·K) | z direction | ASTM D5470 |
| Time to Delamination | >60 | minutes | as-received, 288°C | IPC TM-650 2.4.24.1 |
| Mechanical Properties | ||||
| Copper Peel Strength | 2.4 (13.6) | N/mm (lbs/in) | 10s @ 288°C, 35 μm foil | IPC TM-650 2.4.8 |
| Flexural Strength (MD/CMD) | 60.7 / 44.1 (8.8 / 6.4) | MPa (ksi) | 25°C ± 3°C | ASTM D790 |
| Tensile Strength (MD, CMD) | 55.8 / 45.5 (8.1 / 6.6) | MPa (ksi) | 23°C @ 50% RH | ASTM D3039/D3039-14 |
| Flex Modulus | 6,412 / 5,640 (930 / 818) | MPa (ksi) | 25°C ± 3°C | IPC-TM-650 2.4.4 |
| Dimensional Stability (MD, CMD) | 0.03 / 0.07 | mils/inch | after etch + bake | IPC-TM-650 2.4.39a |
| Physical Properties | ||||
| Flammability | V-0 | - | - | UL 94 |
| Moisture Absorption | 0.03 | % | E1/105 + D48/50 | IPC TM-650 2.6.2.1 |
| Density | 2.28 | g/cm³ | C24/23/50 | ASTM D792 |
| Specific Heat Capacity | 0.813 | J/g·°K | 2 hours at 105°C | ASTM E2716 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
