Rogers AD1000 Printed Circuit Board - High Frequency Double Sided with Immersion Gold
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- Material
- Rogers AD1000 (Woven Glass Reinforced PTFE/Ceramic Filled) / 6-127mil
- MOQ
- 1PCS
- Lead time
- 7-13 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
Introducing the Rogers AD1000 Printed Circuit Board, a cutting-edge solution in the realm of high frequency PCBs. Engineered with a high dielectric constant of 10.2, this woven glass reinforced laminate is designed to facilitate circuit miniaturization while maintaining superior dimensional stability and mechanical robustness compared to traditional low loss materials. The immersion gold surface finish provides excellent solderability and corrosion resistance, making it ideal for demanding RF and microwave applications.
High Dielectric Constant: Exceptional performance with a Dk of 10.2. Thermal Conductivity: 0.81 W/mK for effective heat management. Copper Peel Strength: High peel strength allows for thinner etched line widths. Insertion Loss: Minimal insertion loss for improved signal integrity. Panel Sizes: Available in larger panel sizes to accommodate diverse applications. Moisture Absorption: Low moisture absorption at just 0.03%. Reliability: Excellent CTE values enhance the reliability of ceramic component attachment and PTH.
Aircraft Collision Avoidance Systems (TCAS)Ground Based Radar Surveillance SystemsLow Noise Amplifiers (LNAs)Miniaturized Circuitry & Patch AntennasPower Amplifiers (PAs)Radar Modules and ManifoldsX-Band and Below Applications
PCB specifications
Typical properties: AD1000
Material-level dielectric and mechanical properties, distinct from the board-level specifications above.
Open the standalone data sheet (printable)| Property | Value | Unit | Direction | Condition | Test method |
|---|---|---|---|---|---|
| Dielectric Constant @ 10 GHz | 10.2 | — | — | — | IPC TM-650 2.5.5.5 |
| Dissipation Factor @ 10 GHz | 0.0023 | — | — | — | IPC TM-650 2.5.5.5 |
| Thermal Conductivity | 0.81 W/mK | — | — | — | ASTM E1461 |
| CTE (x,y) 50-150°C | 8, 10 ppm/°C | — | — | — | IPC TM-650 2.4.41 |
| CTE (z) 50-150°C | 20 ppm/°C | — | — | — | IPC TM-650 2.4.24 |
| Copper Peel Strength | >12 lb/in (2.1 N/mm) | — | — | — | IPC TM-650 2.4.8 |
| Water Absorption | 0.03% | — | — | — | IPC TM-650 2.6.2.1 |
| Flammability | Meets V0 | — | — | — | UL-94 |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
