Hybrid RF Circuit Board 5-Layer High Frequency PCB Built on 10mil RO4350B and FR-4
(Printed circuit boards are custom-made products; the images and parameters shown are for reference only)
Brief introduction
Hello Everyone,
Warm greetings!
Today, we are excited to introduce a 5-layer PCB constructed from a combination of high-frequency RF material, RO4350B, and epoxy glass FR-4. This board is specifically designed for 2.4 GHz antenna applications. It has a thickness of 1.0 mm and features through holes. Both sides are covered with a green solder mask, and the pads are finished with immersion gold. These boards are fabricated according to IPC 6012 Class 2 standards using the provided Gerber data. Each batch consists of 25 boards, which are packed for shipment.
Technical features & benefits
- Enhanced Signal Integrity: Improved performance compared to stack-ups made entirely from FR-4.
- High Production Capacity: Our facility boasts a capability of 30,000 square meters per month.
- Diverse PCB Types: We can produce 8,000 different types of PCBs each month.
- Efficient Design Review: Quick CAD/CAM checking and free PCB quotations are available.
- Flexible Order Quantities: No minimum order quantity (MOQ), making it cost-effective for prototypes and small runs.
- Quality Standards: Adheres to IPC Class 2 and IPC Class 3 standards.
Product images
Layer stack-up
The above diagram illustrates the stack-up. "Layer 2" is etched away, leaving five layers of copper on the board.
Application areas
- This versatile PCB is suitable for a wide range of applications, including: consumer electronics; Wi-Fi antennas; 8 port switches; embedded computer DC transformers; inverter systems; Wi-Fi 4G routers; temperature modules.
Properties
RO4350B Typical Properties
| Property | RO4350B | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.48 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.66 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0037 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +50 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.2 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 5.7 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.05 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.69 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 10 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 12 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 32 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.0 (0.88) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.9 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
