BICHENGPCBBicheng Technologies Limited

Hybrid High Frequency PCB 6-Layer Mixed PCB on 20mil RO4350B and FR-4 with Blind Via

(Printed circuit boards are custom-made products; the images and parameters shown are for reference only)

Brief introduction

Hello Everyone,

Good day!

Today, we will discuss a 6-layer hybrid PCB constructed with 20mil RO4350B and FR-4. This article will introduce two specific boards.

Technical features & benefits

  • Stable Dielectric Constant: RO4350B provides a stable dielectric constant across a wide frequency range.
  • Enhanced Signal Integrity: Improved performance compared to all-FR4 stack-ups.
  • Cost Efficiency: Reduced costs over stack-ups using all low-loss materials.
  • High Production Capacity: Capable of producing 8,000 types of PCBs monthly.
  • Certified Manufacturing: Our facility is ISO9001, ISO14001, IATF16949, and UL certified.
  • Flexible Orders: No minimum order quantity (MOQ), with low costs for prototypes and small production runs.

Product images

6 Layer Hybrid RO4350B PCB Top View

PCB specifications

Base MaterialRO4350B 20mil + FR4
Layer Count6 layers - Blind Via
TypesL1-L2, L5-L6
Format100mm x 120mm (1 type = 1 piece)
Surface FinishImmersion gold
Copper WeightOuter layer 35 μm Inner layer 35 μm
Solder Mask / LegendGreen / White
Final PCB Height1.8 mm
StandardIPC 6012 Class 2
Packing20 panels per shipment
Lead Time20 working days
Shelf Life6 months

Layer stack-up

Stackup of 6 Layer Hybrid PCB Design 1
Section view of 6 Layer Hybrid PCB
Stackup of 6 Layer Hybrid PCB Design 2

Application areas

  • The applications for RO4350B hybrid PCBs are diverse, including: Low Noise Amplifiers (LNA), Radar Data Acquisition Converters, Spread Spectrum Devices, 4G Antennas, Transmitters, RF Switches, Splitter Modules.
  • Thank you for reading. Feel free to contact us for your RF PCB inquiries.
  • The first board is designed for a satellite receiver. It features one RO4350B core on the top layer. The stack-up is somewhat complex due to the inclusion of three types of blind vias. This board has a thickness of 1.71 mm, with white silkscreen over a green solder mask on both sides. Immersion gold is applied to the pads and tracks. Each board is supplied as a single unit and is fabricated according to IPC 6012 Class 2 standards using provided Gerber data. A total of 25 boards are packed for shipment.
  • The second board is utilized in a signal booster and incorporates two cores of 20mil RO4350B on the top and bottom sides. The stack-up is displayed below.

Properties

RO4350B Typical Properties

PropertyRO4350BDir.UnitsConditionTest Method
Dielectric Constant (Process)3.48 ± 0.05Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)3.66Z——Microstrip / Differential Phase Length
Dissipation Factor0.0037Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk+50—ppm/°C-50 to 150°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity1.2 × 10¹⁰—MΩ·cmCondition AIPC-TM-650 2.5.17.1
Surface Resistivity5.7 × 10⁹—MΩCondition AIPC-TM-650 2.5.17.1
Moisture Absorption0.05—%D48/50ASTM D570
Thermal Conductivity0.69ZW/(m·K)50°CASTM D5470
CTE (X)10Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)12Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)32Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Copper Peel Strength5.0 (0.88)—lbs/in (N/mm)1 oz ED foilIPC-TM-650 2.4.8
Density1.9—g/cm³—ASTM D792
FlammabilityV-0———UL94
Lead-Free Process CompatibleYes————

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com