BICHENGPCBBicheng Technologies Limited

Hybrid High Frequency Printed Circuit Boards 3-Layer Hybrid RF PCB Made On 13.3mil RO4350B and 31mil RT/Duroid 5880

(PCBs are custom-made products, the picture and parameters shown are just for reference)

Brief introduction

Hello Everyone,

Warm greetings!

Today, we will discuss hybrid PCBs, which can consist of a combination of FR-4 and high-frequency materials, or a blend of different high-frequency materials with varying dielectric constants (DK), such as RT/Duroid 5880 and RO4350B.

This article focuses on a specific type of mixed high-frequency PCB constructed from 13.3mil (0.338mm) RO4350B and 31mil (0.787mm) RT/Duroid 5880, designed for multi-coupler antenna applications.

Technical features & benefits

  • Lowest Electrical Loss: Reinforced PTFE material ensures minimal signal loss.
  • Enhanced Electrical Performance: Optimized for high-frequency applications.
  • Large Workshop Capacity: 16,000 square meters dedicated to PCB manufacturing.
  • Production Capability: 30,000 square meters of production capacity per month.
  • Diverse Product Range: Capability to produce 8,000 types of PCBs monthly.
  • Extensive Experience: Over 17 years in the PCB industry.

Product images

3 Layer Hybrid RO4350B and RT5880 PCB Top View

PCB specifications

Basic SpecificationsDescription
Base MaterialRO4350B 13.3mil (0.338mm) + RT/Duroid 5880 31mil (0.787mm)
Dielectric Constant3.48 ± 0.05 (RO4350B) / 2.20 (RT5880)
Layer Count3 layers
Via TypeThrough holes, blind vias
Format160mm x 90mm = 1 type = 1 piece
Surface FinishImmersion gold
Copper WeightOuter layer 35μm
Soldeask / LegendGreen / White
Final PCB Height1.3 mm
StandardIPC 6012 Class 2
Packing20 panels per shipment
Lead Time20 working days
Shelf Life6 months

Layer stack-up

Stackup of 3 Layer Hybrid RO4350B and RT5880 PCB

Application areas

  • Point-to-Point Digital Radio Antennas, WiFi Amplifiers, Tower-Mounted Boosters, Power Amplifiers, RF Modules

Properties

RO4350B Typical Properties

PropertyRO4350BDir.UnitsConditionTest Method
Dielectric Constant (Process)3.48 ± 0.05Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)3.66Z——Microstrip / Differential Phase Length
Dissipation Factor0.0037Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk+50—ppm/°C-50 to 150°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity1.2 × 10¹⁰—MΩ·cmCondition AIPC-TM-650 2.5.17.1
Surface Resistivity5.7 × 10⁹—MΩCondition AIPC-TM-650 2.5.17.1
Moisture Absorption0.05—%D48/50ASTM D570
Thermal Conductivity0.69ZW/(m·K)50°CASTM D5470
CTE (X)10Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)12Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)32Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Copper Peel Strength5.0 (0.88)—lbs/in (N/mm)1 oz ED foilIPC-TM-650 2.4.8
Density1.9—g/cm³—ASTM D792
FlammabilityV-0———UL94
Lead-Free Process CompatibleYes————

This is a 3-layer board that one layer is etched off.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com