Hybrid PCB | Mixed Material PCB Built on 10 mil RO4350B + FR-4 with Depth Controlled Drill
(PCBs are custom-made products; the images and parameters shown are for reference only)
Brief introduction
Hello Everyone,
Today, we will discuss a 4-layer high-frequency PCB constructed using 10mil RO4350B combined with FR-4.
This board features a 4-layer design, which is relatively straightforward and cost-effective, making it ideal for entering new markets.
Technical features & benefits
- Stable Dielectric Constant: RO4350B maintains a consistent dielectric constant across a wide frequency range, making it an excellent substrate for broadband applications.
- Improved Signal Integrity: Enhanced performance over stack-ups made entirely of FR-4.
- Cost Efficiency: Reduced costs compared to stack-ups using only low-loss materials.
- Comprehensive Capabilities: Our facility meets your PCB needs from prototypes to mass production, backed by IATF 16949 (2016), ISO 14001 (2015), ISO 9001 (2015), and UL certifications to ensure quality.
- Thank you for reading. Feel free to contact us for your RF PCB inquiries.
Product images
Application areas
This 10mil RO4350B hybrid PCB is suitable for a variety of applications, including:
- Preamplifiers, Radar sensors, Digital transmitters, Splitter modules, GPS antennas, Communication relays, Analog transmitters, 4G antennas, RF transmitters, Wi-Fi amplifiers, RFID systems, Attenuators
Our PCB Capability
| Layer Counts | 1-32 |
| Substrate Material | RO4350B, RO4003C, RO4730G3, RO4360G2, RO4533, RO4534, RO4535, RO3003, RO3006, RO3010, RO3035, RO3203, RO3210; RT/Duriod 5880; RT/Duriod 5870, RT/Duriod 6002, RT/Duroid 6010, RT/duroid 6035HTC; TMM3, TMM4, TMM6, TMM10, TMM10i, TMM13i, Kappa 438; TLF-35; RF-35TC, RF-60A, RF-60TC, RF-35A2, RF-45, RF-10, TRF-45; TLX-0, TLX-6, TLX-7, TLX-8; TLX-9, TLY-3, TLY-5; PTFE F4B (DK2.2 DK2.65 DK2.85 DK2.94, DK3.0, DK3.2, DK3.38, DK3.5, DK4.0, DK4.4, DK6.15, DK10.2); AD450, AD600, AD1000, TC350; Nelco N4000, N9350, N9240; FR-4 (High Tg S1000-2M, TU-872 SLK, TU-768, IT-180A etc.), FR-4 High CTI>600V; Polyimide, PET; Metal Core etc. |
| Maximum Size | Flying test: 900*600mm, Fixture test 460*380mm, No test 1100*600mm |
| Board Outline Tolerance | ±0.0059" (0.15mm) |
| PCB Thickness | 0.0157" - 0.3937" (0.40mm--10.00mm) |
| Thickness Tolerance(T≥0.8mm) | ±8% |
| Thickness Tolerance(t<0.8mm) | ±10% |
| Insulation Layer Thickness | 0.00295" - 0.1969" (0.075mm--5.00mm) |
| Minimum Track | 0.003" (0.075mm) |
| Minimum Space | 0.003" (0.075mm) |
| Outer Copper Thickness | 35µm--420µm (1oz-12oz) |
| Inner Copper Thickness | 17µm--350µm (0.5oz - 10oz) |
| Drill Hole(Mechanical) | 0.0059" - 0.25" (0.15mm--6.35mm) |
| Finished Hole(Mechanical) | 0.0039"-0.248" (0.10mm--6.30mm) |
| Diameter Tolerance(Mechanical) | 0.00295" (0.075mm) |
| Registration (Mechanical) | 0.00197" (0.05mm) |
| Aspect Ratio | 12:1 |
| Solder Mask Type | LPI |
| Min Soldermask Bridge | 0.00315" (0.08mm) |
| Min Soldermask Clearance | 0.00197" (0.05mm) |
| Plug via Diameter | 0.0098" - 0.0236" (0.25mm--0.60mm) |
| Impedance Control Tolerance | ±10% |
| Surface Finish | HASL,HASL LF,ENIG,Immersion Tin,Immersion Silver, OSP, Gold Finger, Pure gold plated etc. |
Properties
RO4350B Typical Properties
| Property | RO4350B | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.48 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.66 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0037 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +50 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.2 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 5.7 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.05 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.69 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 10 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 12 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 32 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.0 (0.88) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.9 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Cross Section Overview
The second board features a unique "depth-controlled drill" on the FR-4 side. See the build-up first.
Plated through holes connect each layer, and the pads and vias are finished with immersion gold.
The second board features a unique "depth-controlled drill" on the FR-4 side. See the build-up first.
Layer 1 and layer 2 is the 10mil core. The depth-control drill is dented on FR-4 side. The whole height of this board is only 0.7mm thick.
Let's Explore the Build-Up
The first layer to the second layer consists of a 10mil RO4350B core material. This core has a fixed thickness, which is crucial for maintaining the electrical length of RF lines on the circuit board. The remaining layers are composed of FR-4 materials, bonded using semi-cured sheets. The inner layer has a copper weight of 0.5 ounces, while the outer layer is 1 ounce.
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
