BICHENGPCBBicheng Technologies Limited

Hybrid PCB Mixed Material Circuit Board Different Materials Combined PCB RO4350B + FR4 + RT/duroid 5880 with Immersion Gold

(PCBs are custom-made products, the picture and parameters shown are just for reference)

Brief introduction

Hello Everyone,

Today, we will discuss hybrid PCBs, specifically those that integrate high-frequency materials with epoxy glass.

Technical features & benefits

  • The combination of FR-4 and high-frequency materials is increasingly popular because FR-4 and the vast majority of high frequency materials have little compatibility problems.
  • To ensure reliable lamination, we select a prepreg sheet of high-frequency material and apply the appropriate pressing cycle. Using an adhesive layer made from the same material simplifies the pressing process.

Product images

Hybrid PCB Top View

Our PCB Capability

PCB Type:Hybrid PCB, Mixed PCB
Hybrid type:RO4350B + FR4
RO4003C + FR4
F4B + FR4
RT/duroid 5880 + FR4
RT/duroid 5880 + RO4350B
RO3000 Series + FR4
RT/duroid + FR4
Solder mask:Green, Red, Blue, Black, Yellow
Layer count:4 Layer, 6 Layer, Multilayer
Copper weight:1oz (35µm), 2oz (70µm)
PCB thickness:1.0-10mm
PCB size:≤400mm X 500mm
Surface finish:Bare copper, HASL, ENIG, Immersion tin, Immersion silver, OSP, ENEPIG, Pure gold

Thank you for reading! Feel free to contact us for any PCB inquiries.

Properties

RO4350B Typical Properties

PropertyRO4350BDir.UnitsConditionTest Method
Dielectric Constant (Process)3.48 ± 0.05Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)3.66Z——Microstrip / Differential Phase Length
Dissipation Factor0.0037Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk+50—ppm/°C-50 to 150°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity1.2 × 10¹⁰—MΩ·cmCondition AIPC-TM-650 2.5.17.1
Surface Resistivity5.7 × 10⁹—MΩCondition AIPC-TM-650 2.5.17.1
Moisture Absorption0.05—%D48/50ASTM D570
Thermal Conductivity0.69ZW/(m·K)50°CASTM D5470
CTE (X)10Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)12Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)32Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Copper Peel Strength5.0 (0.88)—lbs/in (N/mm)1 oz ED foilIPC-TM-650 2.4.8
Density1.9—g/cm³—ASTM D792
FlammabilityV-0———UL94
Lead-Free Process CompatibleYes————

Understanding Hybrid PCB Structure

Let's examine the stack-up to grasp the hybrid configuration:

Stackup of FR-4 and RO4350B Hybrid PCB

Layer 1 to layer 2 is the core of RO4350B high frequency material and layer 3 to layer 4 is the core of FR-4 epoxy glass. The 2 cores are bonded by a sheet of adhesive (prepreg).

Types of Hybrid PCB

Hybrid PCBs can combine FR-4 with high-frequency materials, as mentioned above. Another type is a mixture of high frequency material with different dielectric constant (DK), for example RT/duroid 5880 and RO4350B etc.

Stackup of RO4350B and RT/duroid 5880 Hybrid PCB

Reasons to Use Hybrid PCBs

There are three primary reasons to opt for high-frequency multilayer PCBs: cost-effectiveness, enhanced reliability, and improved electrical performance.

  • Cost Efficiency: High-frequency materials are generally more expensive than FR-4. By using a hybrid of FR-4 and high-frequency materials, manufacturers can address cost concerns effectively.
  • Reliability Improvement: High Coefficient of Thermal Expansion (CTE) values in PCB materials can lead to reliability issues. Combining low CTE FR-4 with higher CTE materials results in an acceptable composite CTE, thereby enhancing reliability.
  • Tailored Electrical Performance: Different sections of a mixed PCB may require varying levels of electrical performance. For areas needing high performance, high-frequency materials are employed, while less demanding sections can use FR-4. Additionally, using materials with different DK values can improve electrical properties, particularly in combiners and filters.
Microsection of Hybrid PCB

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com