High Frequency PCB Rogers RO4350B 20mil 0.508mm Double Sided RF PCB for Splitter
(Note: Printed Circuit Boards are custom-made products; the images and specifications provided are for reference only.)
Brief introduction
RO4350B hydrocarbon ceramic laminates are engineered to deliver exceptional high-frequency performance and cost-effective circuit fabrication. The options for laminates available to designers significantly decrease when operational frequencies reach 500 MHz and above. RO4350B material possesses the essential characteristics sought by designers of RF microwave circuits, matching networks, and controlled impedance transmission lines. Its low dielectric loss enables RO4350B to be utilized in various applications where conventional circuit board materials are unsuitable due to higher operating frequencies.
The temperature coefficient of dielectric constant for RO4350B is one of the lowest among circuit board materials, and its dielectric constant remains stable across a wide frequency spectrum. The thermal coefficient of expansion (CTE) of RO4350B offers several significant advantages for PCB designers. Its expansion coefficient closely matches that of copper, ensuring excellent dimensional stability—an essential feature for constructing mixed dielectric multilayer boards. Additionally, the low Z-axis CTE of RO4350B guarantees reliable plated through-hole quality, even under severe thermal shock conditions. With a Tg exceeding 280°C, the expansion characteristics of RO4350B remain consistent throughout the full range of PCB processing temperatures.
Product images
PCB specifications
High Frequency PCB Rogers 20mil 0.508mm RO4350B Double Sided RF PCB for Splitter
| PCB SIZE | 26 x 83mm = 1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | Double sided PCB, 2 Layer PCB |
| Surface Mount Components | YES |
| Through Hole Components | NO |
| Minimum Trace and Space: | 5.98mil / 6.18mil |
| Minimum / Maximum Holes: | 0.3 / 3.2mm |
| Number of Drill Holes: | 431 |
| BOARD MATERIAL | — |
| Glass Epoxy: | RO4350B 20mil (0.508mm), Tg 288℃ |
| Final foil external: | 1.5oz |
| Final height of PCB: | 0.6mm ±0.1 |
| PLATING AND COATING | — |
| Surface Finish | Immersion Gold (81.1%) 2µ" over 100µ" nickel |
| Solder Mask Apply To: | Top and Bottom, 12micron Minimum |
| Solder Mask Color: | Green, LP-4G G-05, Nanya supplied |
| CONTOUR/CUTTING | Routing |
| VIA | Plated Through Hole(PTH) |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 35um(1oz)+plate TOP layer
- RO4350B 20mil (0.508mm)
- copper ------- 35um(1oz)+plate BOT Layer
Application areas
- Automotive Radar and Sensors
- Cellular Base Station Antennas
- Direct Broadcast Satellites
- Low Noise Block
- Power Amplifiers
- RFID
Properties
RO4350B Typical Properties
| Property | RO4350B | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.48 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.66 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0037 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +50 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.2 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 5.7 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.05 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.69 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 10 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 12 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 32 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.0 (0.88) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.9 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
