High-Frequency PCB: RO4350B 10mil (0.254mm) Double-Sided RF PCB for LTE Applications
(Note: Custom PCBs are tailored products; the images and specifications provided are for reference only.)
Brief introduction
RO4350B hydrocarbon ceramic laminates are engineered for exceptional high-frequency performance while maintaining cost-effective circuit fabrication. When operational frequencies reach 500 MHz and above, the selection of available laminates for designers significantly narrows. The RO4350B material possesses essential attributes for RF microwave circuit design, matching networks, and controlled impedance transmission lines. Its low dielectric loss makes RO4350B suitable for numerous applications where traditional circuit board materials are limited by higher operating frequencies.
This material boasts one of the lowest temperature coefficients of dielectric constant among circuit board materials, ensuring stability across a wide frequency range. The thermal coefficient of expansion (CTE) of RO4350B provides several advantages for PCB designers. Its expansion coefficient closely matches that of copper, resulting in excellent dimensional stability—crucial for mixed dielectric multi-layer board constructions. The low Z-axis CTE of RO4350B guarantees reliable plated through-hole quality, even under severe thermal stress. With a glass transition temperature (Tg) exceeding 280°C, RO4350B maintains stable expansion characteristics throughout all PCB processing temperatures.
Product images
PCB specifications
High Frequency PCB Rogers 10mil 0.254mm RO4350B Double Sided RF PCB for LTE
| PCB SIZE | 30 x 80mm = 1up |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | NO |
| BOARD MATERIAL | — |
| Glass Epoxy: | RO4350B Tg280℃, εr<3.48, Rogers Corp. |
| Final foil external: | 1.5 oz |
| Final height of PCB: | 0.3 mm ±0.1 |
| PLATING AND COATING | — |
| Surface Finish | Immersion gold, 16% |
| VIA | NO |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 35um(1 oz)+plate TOP layer
- RO4350B 0.254mm
- copper ------- 35um(1oz)+plate BOT Layer
Application areas
- Automotive Radar and Sensors
- Cellular Base Station Antennas
- Direct Broadcast Satellites
- Low Noise Block
- Power Amplifiers
- RFID Technology
Properties
RO4350B Typical Properties
| Property | RO4350B | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.48 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.66 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0037 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +50 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.2 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 5.7 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.05 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.69 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 10 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 12 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 32 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.0 (0.88) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.9 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
