High Frequency PCB: Rogers 60mil 1.524mm RO4350B Double-Sided RF Circuit Board for Patch Antenna
(Note: Printed Circuit Boards are custom-made products; the images and specifications provided are for reference only.)
Brief introduction
RO4350B hydrocarbon ceramic laminates are engineered to deliver exceptional high-frequency performance and cost-effective circuit fabrication. As operational frequencies reach 500 MHz and above, the range of laminates available to designers becomes significantly limited.
RO4350B material has the essential properties required by designers of RF microwave circuits, matching networks, and controlled impedance transmission lines. Its low dielectric loss enables the use of RO4350B in various applications where conventional circuit board materials are restricted due to higher operating frequencies.
The temperature coefficient of dielectric constant for RO4350B is one of the lowest among circuit board materials, and its dielectric constant remains stable across a wide frequency range.
The thermal coefficient of expansion (CTE) of RO4350B offers several advantages for PCB designers. Its expansion coefficient closely matches that of copper, which ensures excellent dimensional stability—a critical property for constructing mixed dielectric multilayer boards.
The low Z-axis CTE of RO4350B offers reliable plated through-hole quality, even in extreme thermal shock conditions. With a Tg exceeding 280°C, the expansion characteristics of RO4350B remain stable throughout the entire range of PCB processing temperatures.
Product images
PCB specifications
High Frequency PCB Rogers 60mil 1.524mm RO4350B Double Sided RF Circuit Board Patch Antenna PCB
| PCB SIZE | 135 x 135mm = 1PCS |
| BOARD TYPE | High frequency PCB, RF PCB |
| Number of Layers | Double sided PCB |
| Surface Mount Components | YES |
| Through Hole Components | YES |
| Minimum Trace and Space: | 11mil / 12mil |
| Minimum / Maximum Holes: | 0.3 / 2.2mm |
| Number of Drill Holes: | 184 |
| BOARD MATERIAL | — |
| Glass Epoxy: | RO4350B 60mil, Tg 288℃ |
| Final foil external: | 1.5oz |
| Final height of PCB: | 1.6mm ±0.16 |
| PLATING AND COATING | — |
| Surface Finish: | Electroless nickel over Immersion Gold (ENIG) |
| VIA | Plated Through Hole(PTH) |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
Layer stack-up
- copper ------- 35um(1oz)+PLATE
- RO4350B 60mil
Application areas
- Automotive Radar and Sensors
- Cellular Base Station Antennas
- Direct Broadcast Satellites
- Low Noise Block
- Power Amplifiers
- RFID
Properties
RO4350B Typical Properties
| Property | RO4350B | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.48 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.66 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0037 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +50 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.2 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 5.7 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.05 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.69 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 10 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 12 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 32 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.0 (0.88) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.9 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
