4 Layer RF Circuit Board on Rogers 60mil RO4350B and 10mil RO4350B with Back Drill for UHF Coupler
(Printed circuit boards are custom-made products; the images and specifications shown are for reference only.)
Brief introduction
Hello Everyone,
This 4 layer RF PCB is constructed using 60mil RO4350B and 10mil RO4350B, specifically designed for UHF coupler applications. Let's take a look at the stack-up.
Technical features & benefits
- Stable Dielectric Constant: RO4350B maintains a consistent dielectric constant across a wide frequency range.
- Ideal for Broadband Applications: The properties of RO4350B make it an excellent substrate choice for broadband uses.
- On-Time Delivery: We achieve a delivery rate higher than 98%, ensuring timely service.
- Focus on Small to Medium Production Runs: We specialize in small batches and medium volume production.
- Rigorous WIP Inspection: Our strict work-in-progress inspection and monitoring guarantee high-quality standards.
Product images
Layer stack-up
The base materials consist of a 60mil RO4350B core and a 10mil RO4350B core, added with 4mil RO4450F prepreg. Each layer features 35 μm (1oz) copper, resulting in a final thickness of 2.1mm. The pads are plated with immersion gold. This design incorporates back-drilled vias from the 10mil core, which effectively reduces noise interference and enhances signal integrity. By employing back drilling, the complexity of PCB fabrication is minimized, eliminating the need for buried or blind vias.
Application areas
- Antennas
- Interference Filters
- Sound Control Switch Induction
- Trunk Amplifiers
Properties
RO4350B Typical Properties
| Property | RO4350B | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.48 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.66 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0037 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +50 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.2 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 5.7 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.05 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.69 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 10 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 12 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 32 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.0 (0.88) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.9 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
