4 Layer High Frequency PCB on Dual 10mil RO4350B Cores for Wireless Antenna Systems
(Printed circuit boards are custom-made products; the images and specifications shown are for reference only.)
Brief introduction
Hello Everyone,
We present a 4-layer high-frequency PCB constructed with two 10mil RO4350B cores, bonded together using one sheet of RO4450F prepreg. Depending on signal transmission requirements, the prepreg can consist of one (4mil), two, or three sheets. This board is specifically designed for wireless antenna systems. It has a thickness of 0.80 mm and features a white legend on a green solder mask on both sides, with immersion gold plating on the pads. The boards are manufactured according to IPC 6012 Class 2 standards using the provided Gerber data, and each shipment contains 25 panels.
Technical features & benefits
- Excellent High-Frequency Performance: The RO4350B material provides superior high-frequency characteristics.
- Low Dielectric Tolerance and Loss: Ensures reliable signal transmission and minimal distortion.
- Certified Manufacturing Facility: Produced in an ISO9000, ISO14001, and IATF16949 certified factory.
- High-Volume Capacity: 30,000 square meters of monthly production capability.
- Diverse Product Mix: Capable of manufacturing 8,000 different PCB types per month.
Product images
Layer stack-up
Application areas
- HDMI Splitters
- 3G Routers
- Bluetooth Modules
- WiFi Amplifiers
- Bluetooth USB Dongles
- Low Noise Amplifiers
- Interference Filters
- Tower-Mounted Boosters
- Multi-Couplers
Properties
RO4350B Typical Properties
| Property | RO4350B | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.48 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.66 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0037 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +50 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.2 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 5.7 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.05 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.69 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 10 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 12 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 32 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.0 (0.88) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.9 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Enhanced Construction Options
If needed, the prepreg can be increased to 2 or 3 sheets to optimize the PCB for specific applications. The following cross-section illustrates a 3-ply RO4450F construction:
Call to Action
For more information or to discuss your specific requirements, please feel free to contact us.
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
