4 Layer High Frequency PCB Built on Dual 20mil RO4350B Cores with Back Drill for GPS Trackers
(Printed circuit boards are custom-made products; the images and specifications shown are for reference only.)
Brief introduction
Hello Everyone,
Warm greetings!
We present a 4-layer Rogers PCB constructed with two 20mil (0.508mm) RO4350B cores, specifically designed for GPS tracker applications. This board utilizes back drilling technology to create "blind vias," as illustrated in the stack-up.
Technical features & benefits
- Exceptional High Frequency Performance: Achieved through low dielectric tolerance and loss.
- Low Thermal Coefficient: Maintains a stable dielectric constant.
- Noise Reduction: Back drilling minimizes noise interference.
- Certified Manufacturing: Produced in ISO9001, ISO14001, and UL certified facilities.
- High Production Capacity: Capable of producing 30,000 square meters per month.
Product images
PCB specifications
| Base Material | RO4350B 20mil + RO4450B 4mil |
| Layer Count | 4 Layers |
| Type | Mixed multiplier milled separately |
| Dimensions | 70mm x 125mm (1 piece) |
| Surface Finish | Immersion gold |
| Copper Weight | Outer layer 35μm / Inner layer 18μm |
| Solder Mask / Legend | Green / White |
| Final PCB Height | 1.42mm |
| Standard | IPC 6012 Class 2 |
| Packing | Each shipment contains 25 panels |
| Lead Time | 12 working days |
| Shelf Life | 6 months |
Layer stack-up
Back drilling effectively reduces noise interference and enhances signal integrity. This technique simplifies PCB fabrication and eliminates the need for buried or blind vias.
Application areas
- Multiplexers, Video Transmission Equipment, Low Noise Blocks (LNB), Power Dividers
Properties
RO4350B Typical Properties
| Property | RO4350B | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.48 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.66 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0037 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +50 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.2 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 5.7 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.05 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.69 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 10 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 12 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 32 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.0 (0.88) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.9 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
