BICHENGPCBBicheng Technologies Limited

Wangling WL-CT330 4-Layer 2.7mm Immersion Gold PCB – 5G, Radar & Satellite

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

WL-CT330 is a thermosetting high-frequency laminate composed of hydrocarbon resin, composite ceramics, and fiberglass reinforcement. It offers stable dielectric properties, ultra-low loss, and a high Tg (>280℃) for thermal reliability; processes like FR4 (simpler than PTFE), supports lead-free assembly (260℃), and is a cost-effective alternative to traditional high-frequency materials for high-speed RF designs.

This 4-layer rigid PCB combines WL-CT330 with High Tg FR-4 (S1000-2M) to achieve excellent mechanical stability, thermal reliability, and high-frequency signal integrity, making it ideal for demanding RF and microwave applications.

Dielectric Constant (DK): 3.30 ± 0.06 at 10GHz

Dissipation Factor (Df): 0.0026 at 10GHz

Thermal Resistance: T260 >60 mins, T288 >20 mins (typical for series)

Peel Strength (Min.): 0.85 N/mm (≈9.7 lbs/inch) for 1OZ ED Copper

CTE: X = 15 ppm/℃, Y = 13 ppm/℃, Z = 39 ppm/℃

High volume/surface resistivity (5×10⁹ Mohm·cm / Mohm)

Stable TcDk (temperature coefficient of DK)

Stable dielectric properties over frequency and temperature

Ultra-low loss for high-speed and high-frequency designs

High Tg (>280°C) ensures thermal reliability during lead-free assembly

Processable like standard FR4 – no special PTFE-specific handling required

Excellent dimensional stability with CTE matched to copper

High thermal conductivity for power applications

Cost-effective alternative to traditional high-frequency laminates

Reliable plated-through hole performance

Copper_layer_1 35 μm WL-CT330 1.524 mm (60 mil) Copper_layer_2 35 μm Prepreg 1080 RC63% + 7628 (43%) 0.254 mm (10 mil) Copper_layer_3 35 μm S1000-2M 0.8 mm (31.5 mil) Copper_layer_4 35 μm

Components: 45 Total Pads: 225 Thru Hole Pads: 126 Top SMT Pads: 59 Bottom SMT Pads: 40 Vias: 63 Nets: 9

5G/6G base stations & phased array antennas

Aerospace/defense radar (early warning, airborne)

High-speed backplanes & server/networking gear

Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide

9.WL-CT330 High-Frequency Laminate – Product Introduction

The WL-CT series (including WL-CT330) uses hydrocarbon resin and ceramic-filled fiberglass reinforcement, providing low-loss performance while maintaining FR4-like processability – much simpler than PTFE-based materials, ensuring better circuit consistency and stability. These materials can replace similar foreign products.

Available dielectric constants in the WL-CT series: 3.00, 3.30, 3.38, 3.48, 4.10, 6.15.

The series is available with ED copper or reverse-treated (RTF) copper foil. RTF copper foil offers excellent PIM performance, reduces conductor loss and insertion loss, and uses an adhesive treatment for better bonding.

Aluminum-backed versions (WL-CT***-AL) are also available for shielding or heat dissipation.

Low dielectric constant tolerance and low loss

Hydrocarbon ceramic thermoset resin system – better PCB processability and heat resistance

Excellent dielectric constant temperature stability

CTE in X/Y direction matched to copper; low Z-axis CTE for thermal stability and plated-through hole reliability

High Tg >280°C – maintains dimensional stability and copper hole quality at high temperatures

High thermal conductivity – better than comparable thermoplastic materials, suitable for high-power applications

Commercial, high-volume, cost-effective product

Excellent radiation resistance – maintains dielectric and physical properties after irradiation

Low outgassing – meets aerospace vacuum outgassing requirements

Aerospace equipment, space and airborne systems, aircraft

Microwave, antenna, phase-sensitive antennas

Early warning radar, airborne radar, and other radar systems

Phased array antennas, beamforming networks

Application areas

  • Dielectric Constant (DK): 3.30 ± 0.06 at 10GHz
  • Dissipation Factor (Df): 0.0026 at 10GHz
  • Tg: >280℃
  • Thermal Conductivity: 0.59 W/m·K
  • Thermal Resistance: T260 >60 mins, T288 >20 mins (typical for series)
  • Peel Strength (Min.): 0.85 N/mm (≈9.7 lbs/inch) for 1OZ ED Copper
  • CTE: X = 15 ppm/℃, Y = 13 ppm/℃, Z = 39 ppm/℃
  • Moisture Absorption: 0.05% (max.)
  • UL 94-V0 flammability rating
  • High volume/surface resistivity (5×10⁹ Mohm·cm / Mohm)
  • Stable TcDk (temperature coefficient of DK)
4-Layer WL-CT330 PCB Immersion Gold
CCL 77 WL-CT330

PCB specifications

Base materialWL-CT330 + High Tg FR-4 (S1000-2M)
Layer count4-layer
Board dimensions165mm x 96.5mm = 1PCS, +/- 0.15mm
Minimum Trace/Space5/6 mils
Minimum Hole Size0.25mm
Blind viasNo
Finished board thickness2.7mm
Finished Cu weight1oz (1.4 mils) inner/outer layers
Via plating thickness20 μm
Surface finishImmersion Gold
Top SilkscreenBlack
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskGreen
100% Electrical testUsed prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com