BICHENGPCBBicheng Technologies Limited

Rogers TMM10 2-Layer 15mil High-Dk Thermoset PCB with EPIG Nickel-Free Finish

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers TMM 10 thermoset microwave materials offer the benefits of both PTFE and ceramic based substrates, but is not limited by the same mechanical properties and production techniques.

Dielectric Constant (Dk) of 9.20 +/- .230 Dissipation factor of .0022 at 10GHz Thermal coefficient of Dk of -38 ppm/°K Coefficient of thermal expansion matched to copper Decomposition Temperature (Td) of 425 °C TGA Coefficient of Thermal Expansion - x y z : 21ppm/K, 21ppm/K, 20ppm/K Thermal Conductivity of 0.76W/mk Available in a thickness range of .0015 to .500 inches +/- .0015”

Mechanical properties resist creep and cold flow Resistant to process chemicals, reducing damage during fabrication Material does not require a sodium napthanate treatment prior to electroless plating Based on a thermoset resin, allowing for reliable wire-bonding

Copper layer 1 – 35 μm Rogers TMM10 Core – 0.381 mm (15mil) Copper layer 2 – 35 μm

Components: 25 Total Pads: 36 Thru Hole Pads: 12 Top SMT Pads: 24 Bottom SMT Pads: 0 Vias: 25 Nets: 2

Chip testers Dielectric polarizers Satellite communication systems GPS antennas, and patch antennas

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

Rogers TMM10 PCB

PCB specifications

Base MaterialTMM10
Layer CountDouble sided
Board Dimensions85mm × 120mm (±0.15mm)
Minimum Trace/Space5/7 mils
Minimum Hole Size0.4mm
Blind ViasNo
Finished Board Thickness0.5mm
Finished Cu Weight (Outer Layers)1oz (1.4 mils)
Via Plating Thickness20 μm
Surface FinishEPIG (Electroless Palladium Immersion Gold, Nickel-free)
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
Electrical Test100% prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com