BICHENGPCBBicheng Technologies Limited

TP600 2-Layer 19.6mil High-Frequency Thermoplastic PCB with ENEPIG Finish

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

TP material is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP-type laminates consists of ceramics and polyphenylene Oxide resin (PPO), without fiberglass reinforcement. The dielectric constant can be precisely adjusted by adjusting the ratio between ceramics and PPO resin. The production process is special, and it has excellent dielectric performance and high reliability. TP refers to the smooth surface material without copper cladding, TP-1 refers to the material with copper cladding on one side, and TP-2 refers to the material with copper cladding on both sides.

The dielectric constant can be arbitrarily selected within the range of 3 to 25 according to circuit requirements, and it is stable. Common dielectric constants include 3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 9.8, 10.2, 11, 16, and 20. The dielectric loss is low, and the loss increases as the frequency increases, but the change is not significant within 10 GHz. The corresponding part numbers are TP300, TP440, TP600, TP615, TP920, TP960, TP980 etc.

Dielectric constant (Dk) of 6±0.12 at 10GHz Dissipation factor of 0.0010 at 10GHz Low TCDK at -50 ppm/°C, -55°C to 150°C CTE x-axis of 50 ppm/°C, CTE y-axis of 50 ppm/°C, CTE z-axis of 60 ppm/°C, -55°C to 150°C Thermal conductivity of 0.55 W/mk Moisture absorption of 0.01% UL 94-V0

Unique ceramic-PPO thermoplastic composite without fiberglass reinforcement Precisely tunable dielectric constant (3 to 25 range) Excellent dielectric performance and high reliability Low dielectric loss with stable frequency response up to 10 GHz Low moisture absorption and high thermal stability Suitable for high-reliability military and aerospace applications

Copper layer 1 – 35 μm TP600 Core – 0.5 mm (19.6mil) Copper layer 2 – 35 μm

Components: 19 Total Pads: 56 Thru Hole Pads: 25 Top SMT Pads: 31 Bottom SMT Pads: 0 Vias: 78 Nets: 2

Global Satellite Navigation System Missile-borne systems Fuze technology Miniaturized antenna

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

TP600 PCB

PCB specifications

Base MaterialTP600
Layer CountDouble sided
Board Dimensions42mm × 45mm (±0.15mm)
Minimum Trace/Space7/6 mils
Minimum Hole Size0.4mm
Blind ViasNo
Finished Board Thickness0.6mm
Finished Cu Weight (Outer Layers)1oz (1.4 mils)
Via Plating Thickness20 μm
Surface FinishENEPIG
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Special FeaturesCountersunk holes
Electrical Test100% prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com