BICHENGPCBBicheng Technologies Limited

CLTE-AT 2-Layer 5mil Ultra-Thin Ceramic PTFE PCB with Immersion Gold

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

CLTE-A laminates represent the commercial version of the CLTE™ product line.CLTE-AT laminates use the common building blocks developed with CLTE-XT™ laminates, but with some changes to make the product more affordable. This results in a higher dielectric constant (3.00) and a slightly different thickness than the CLTE-XT laminates.

CLTE-AT micro dispersed ceramic PTFE composites utilize a woven fiberglass reinforcement to provide the highest degree of dimensional stability, critical in multilayer designs. CLTE-AT laminates are in a “League of their Own” for registration when utilizing thin substrates (i.e. 0.005” and 0.010”).

CLTE-AT laminates have “Best-in-Class” Insertion Loss (S21) and Loss Tangent(0.0013) in the commercial marketplace and second only to CLTE-XT laminates.

Rogers’ CLTE-AT laminates were designed to provide a quality peel strength without having to resort to the utilization of the lossier, rougher coppers prevalent in competitive products to achieve acceptable copper adhesion.

CLTE-AT laminates have Low CTE xyz and Very Low TCEr for applications that require Electrical Phase Stability, Dk Stability, and Mechanical Stability well over a -55 to 150°C Operating Temperature. CLTE-AT laminates continue the competitive advantages of CLTE laminates (dimensional stability, low absorption of moisture and processing chemicals, ease of processability). The higher thermal conductivity of CLTE-AT laminates improve heat transfer relative to alternative materials and enable better power handling.

Superior signal integrity Ceramic/PTFE Microwave Composite Mechanically more robust and more dimensionally stable than alternatives Lowest Insertion Loss in Commercial Class

Excellent thermal/mechanical performance characteristics Very Low Loss Tangent (0.0013) Electrical Phase Stability vs. Temperature High Thermal Conductivity of 0.64 W/mk Tight Dielectric Constant (±0.04) and Thickness Tolerance

Woven glass reinforcement Excellent Thermal Stability of Dk and Df Phase Stability across temperature High Degree of Dimensional Stability required for complex, multilayer boards Excellent CTE in X,Y and Z with value of 8, 8 and 20 ppm/˚C respectively

Physical Properties Flammability of UL 94-V0 Moisture Absorption of 0.03% Outgassing, Total Mass Lost(TML) 0.04%; Collected Volatiles 0; Water Vapor Recovered 0

2-layer rigid PCB Copper layer 1 – 35 μm CLTE-AT substrate – 0.13 mm (5mil) Copper layer 2 – 35 μm

Components: 25 Total Pads: 39 Thru Hole Pads: 13 Top SMT Pads: 26 Bottom SMT Pads: 0 Vias: 24 Nets: 2

Chip testers Dielectric polarizers Satellite communication systems GPS antennas, and patch antennas

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

CLTE-AT Ultra-Thin PCB

PCB specifications

Base MaterialCLTE-AT
Layer CountDouble sided
Board Dimensions56mm × 99mm (±0.15mm)
Minimum Trace/Space4/6 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness0.2mm
Finished Cu Weight1oz (1.4 mils)
Via Plating Thickness20 μm
Surface FinishImmersion Gold
Top SilkscreenBlack
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
Electrical Test100% prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com