BICHENGPCBBicheng Technologies Limited

Wangling TP1600 2-Layer 0.9mm Pure Gold Plating PCB – High Dk Microwave Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

MOQ
1PCS
Lead time
7-10 working days
Packaging
Vacuum / Anti-static Packaging
Payment
T/T, Paypal

Brief introduction

TP1600 is a specialized high-frequency microwave composite dielectric copper-clad laminate (CCL). It belongs to the TP series, which uses a ceramic-filled polyphenylene oxide (PPO) resin matrix, no fiberglass reinforcement, formed via compression molding. The model number directly indicates its nominal dielectric constant of 16.0 (hence TP1600). The dielectric constant is precisely adjusted by modifying the ratio of ceramic to PPO resin. The production process is special, offering excellent dielectric properties and high reliability.

TP material is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP series laminates is composed of ceramic and polyphenylene oxide (PPO) resin, without fiberglass reinforcement. The dielectric constant is precisely adjusted by modifying the ratio between ceramic and PPO resin. TP refers to non-clad smooth material, TP-1 refers to single-sided copper clad, and TP-2 refers to double-sided copper clad.

This 2-layer rigid PCB is constructed entirely with Wangling TP1600 as the core material, making it ideal for miniaturized antennas, RF/microwave filters, couplers, resonant cavities, aerospace, defense, satellite payloads, and navigation (Beidou) applications.

Dielectric constant (Dk/εr) of 16.0 ± 0.32 (16.0 ± 0.4 per data sheet)

Dissipation factor (Df/tanδ) of 0.0012 at 5 GHz (0.0015 typical)

TcDk (Temperature Coefficient of Dk) of -40 ppm/°C

High Dk with low and stable loss for compact antennas, resonant structures, and high-frequency matching networks

No fiberglass cloth: smooth surface, uniform electrical performance, avoids weave effect issues

Radiation-resistant and low outgassing for aerospace, satellite, and military applications

Long-term operating temperature: -100°C to +150°C

High Dk enables circuit size reduction for compact antenna designs

Low and stable loss ensures excellent high-frequency performance

No fiberglass reinforcement eliminates glass weave effect

Smooth surface provides uniform electrical performance

Easier machining than pure ceramics: drillable, turnable, grindable, etchable

Reliable copper-dielectric adhesion compared to vacuum-deposited ceramic substrates

Thermoplastic processing offers good yield and lower fabrication costs than alumina/AlN ceramics

Radiation-resistant for space applications

Low outgassing meets aerospace requirements

4. Wangling TP1600 PCB Construction Details

5. PCB Stackup (2-Layer Rigid Structure)

RF/microwave filters, couplers, resonant cavities

Aerospace, defense, satellite payloads, navigation (Beidou)

High-frequency sensor modules requiring stable high-Dk performance

Type of artwork supplied: Gerber RS-274-X

Reflow soldering max temperature ≤ 200°C (if used at all)

Material not suitable for 260°C thermal shock testing

Not recommended for standard multilayer lamination (use low-Tg prepregs only if necessary, after feasibility review)

Long-term use temperature: -100°C to +150°C (above 180°C may cause deformation, copper peeling, and electrical property changes)

10. Wangling TP1600 Ceramic-Filled PPO Laminate – Product Introduction

TP1600 is a specialized high-frequency microwave composite dielectric copper-clad laminate (CCL). It belongs to the TP series, which uses a ceramic-filled polyphenylene oxide (PPO) resin matrix, no fiberglass reinforcement, formed via compression molding. The model number directly indicates its nominal dielectric constant of 16.0. The dielectric constant is precisely adjusted by modifying the ratio of ceramic to PPO resin. The production process is special, offering excellent dielectric properties and high reliability.

TP material is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP series laminates is composed of ceramic and polyphenylene oxide (PPO) resin, without fiberglass reinforcement. The dielectric constant can be selected within the range of 3 to 25 according to circuit requirements, with common Dk values including 3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 10.2, 11, 16, and 20. The material exhibits low dissipation factor with minimal variation up to 10 GHz.

The material offers excellent radiation resistance and low outgassing, making it ideal for Beidou navigation, missile-borne, fuze, and miniaturized antenna applications. Copper-to-dielectric adhesion is more reliable than vacuum-deposited coatings on ceramic substrates. The material is easy to machine (drilling, turning, grinding, shearing, etching) – a significant advantage over ceramic substrates.

PCB fabrication is convenient using standard thermoplastic processing methods, with high yield and much lower fabrication costs compared to ceramic substrates. Due to material characteristics, multilayer processing is generally not recommended. If multilayer processing is required, use low-temperature bonding films only after thorough feasibility review.

13. Dielectric Constant Options (TP Series)

TP series can provide dielectric constants from 3 to 25 as required, including: 3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 10.2, 11, 16, 20.

15. Standard Thicknesses, Panel Sizes & Claddings

Standard Thicknesses (Total thickness with copper or dielectric thickness – customer must specify)

TP1600 PCB 31.49mil Pure Gold Plating
CCL 139 TP1600

PCB specifications

Base materialWangling TP1600 (ceramic-filled PPO, no fiberglass)
Layer count2-layer rigid PCB
Board dimensions75mm x 68mm = 1 PCS, +/- 0.15mm
Minimum Trace/Space4/6 mils
Minimum Hole Size0.2mm
Blind viasNo
Finished board thickness0.9mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
Surface finishPure gold plating
Top SilkscreenWhite
Bottom SilkscreenWhite
Top Solder MaskGreen
Bottom Solder MaskGreen
100% Electrical testUsed prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com