TP1020 2-Layer 4.1mm Thick ENIG PCB for High-Frequency RF/Microwave Applications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
TP material is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP-type laminates consists of ceramics and polyphenylene Oxide resin (PPO), without fiberglass reinforcement. The dielectric constant can be precisely adjusted by adjusting the ratio between ceramics and PPO resin. The production process is special, and it has excellent dielectric performance and high reliability. TP refers to the smooth surface material without copper cladding, TP-1 refers to the material with copper cladding on one side, and TP-2 refers to the material with copper cladding on both sides.
The dielectric constant can be arbitrarily selected within the range of 3 to 25 according to circuit requirements, and it is stable. Common dielectric constants include 3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 9.8, 10.2, 11, 16, and 20. The dielectric loss is low, and the loss increases as the frequency increases, but the change is not significant within 10 GHz. The corresponding part numbers are TP300, TP440, TP600, TP615, TP920, TP960, TP980, TP1020 etc.
Dielectric constant (Dk) of 10.2±0.2 at 10GHz Dissipation factor of 0.0012 at 10GHz Low TCDK at -40 ppm/°C, -55°C to 150°C CTE x-axis of 40 ppm/°C, CTE y-axis of 40 ppm/°C, CTE z-axis of 55 ppm/°C, -55°C to 150°C Thermal conductivity of 0.67 W/mk Moisture absorption of 0.01% UL 94-V0
Adjustable dielectric constant (3-25 range) Excellent dielectric performance and high reliability No fiberglass reinforcement Stable electrical properties Low dielectric loss Special production process ensures quality
Copper layer 1 - 35 μm TP1020 Core - 4.0 mm (157.5mil) Copper layer 2 - 35 μm
Components: 2 Total Pads: 12 Thru Hole Pads: 8 Top SMT Pads: 4 Bottom SMT Pads: 0 Vias: 8 Nets: 2
Global Satellite Navigation System Missile-borne systems Fuze technology Miniaturized antenna
IPC-Class 2 compliant 100% electrical tested Global availability Gerber RS-274X support
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
